A-Tech 16GB DDR4 3200 ECC SODIMM CL22 1.2V 1Rx8 laptop RAM
- 16GB
- 260-Pin DDR4 SO-DIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
16 GB DDR4-2933 ECC registered DIMM with CL21 latency and 1.2 V operation for server workloads
Capacity 16GB
The A-Tech 16GB DDR4 2933 ECC RDIMM is a registered DIMM module built for servers and workstations that require error-correcting memory. It operates at DDR4 2933 speed with CL21 latency and a standard 1.20V voltage. This single-rank x8 module uses major brand chips and a 288-pin interface to deliver 16GB of reliable capacity for compatible enterprise systems.
The module runs at the standard DDR4 voltage of 1.20V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping to maintain stable operation under sustained workloads. Power consumption scales with the 2933 MHz data rate and the single 16GB rank during normal use.
On-die ECC technology detects and corrects single-bit errors to protect data integrity in critical applications. The registered design places a buffer between the DRAM and the system memory controller, improving signal integrity when multiple modules are populated. These features make the module suitable for environments where uptime and accuracy are essential.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 16GB 1Rx8 PC4-2933Y-R |
| Part Number | AT16G1D4D2933RS8N12V |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Align the notch on the 288-pin DDR4 module with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered modes are active for the 1Rx8 configuration.
The module has no heat spreader and uses 1.20V major-brand chips; keep server airflow clean and run periodic memory diagnostics, replacing the DIMM only if ECC correctable errors rise or a diagnostic flags a hard fault.
The CL21 latency at 2933 MHz and single-rank 1Rx8 organisation set the bandwidth ceiling; sustained loads hit the 23400 MB/s theoretical throughput limit before thermal throttling becomes a factor.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?