BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278351BTC
Raktáron
A-Tech
A-Tech 16GB DDR5 4800MHz CL40 262-Pin SODIMM for HP 5S4C4AA laptop RAM
16 GB DDR5 laptop module running at 4800 MHz with CL40 latency and 1.1 V operation
- Capacity16GB
- Type262-Pin DDR5 SO-DIMM
- SpeedDDR5 4800 (PC4 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCNo
- Boosts multitasking with 16GB DDR5 capacity
- Runs at 4800MHz PC5-38400 for fast data transfer
- Low 1.10V voltage reduces power draw
- 262-pin SODIMM fits compatible HP 5S4C4AA laptops
- CL40 latency supports responsive system performance
HP 5S4C4AA compatible DDR5 SODIMM
This 16GB DDR5 module operates at 4800MHz with CL40 latency and 1.10V voltage. The 262-pin SO-DIMM form factor fits laptop memory slots. It uses major-brand chips and is unbuffered non-ECC.
Suits single-slot 16GB DDR5 upgrades
Users whose laptop accepts one 262-pin DDR5 SO-DIMM at 4800MHz can install this module. Builders needing ECC, registered memory, or a different pin count should look elsewhere.
Deciding spec: 262-pin DDR5 SO-DIMM at 4800MHz
Verify that your system requires a 262-pin DDR5 SO-DIMM running at 4800MHz (PC5-38400) with CL40 timing and 1.10V. If the slot, generation, speed or voltage differ, this module will not work.
Erősségek
- Boosts multitasking with 16GB DDR5 capacity
- Runs at 4800MHz PC5-38400 for fast data transfer
- Low 1.10V voltage reduces power draw
- 262-pin SODIMM fits compatible HP 5S4C4AA laptops
- CL40 latency supports responsive system performance
Műszaki adatok
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC4 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Kérdések a termékről
Will this 16GB DDR5 4800MHz module run at the same speed if I keep my original memory installed?
The module runs at 4800MHz CL40; if the existing memory is slower, the system will typically downclock both to the lowest common speed.
How can I confirm the new RAM is detected at 4800MHz after installation?
Check the memory speed in BIOS or use a system tool such as CPU-Z or Task Manager to verify it shows 4800MHz.
Does the box include only the 262-pin SODIMM or are tools and thermal pads supplied too?
Only the 16GB DDR5 SODIMM is included; no tools, thermal pads or additional cables are provided.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
