A-Tech 16GB (4x4GB) DDR4 2133MHz CL15 1.2V 260-Pin SO-DIMM Laptop RAM Kit
- 16GB (4 x 4GB)
- 260-Pin DDR4 SO-DIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
A dual-channel kit of two 16 GB DDR4 DIMMs running at 2133 MHz with CL15 latency and 1.2 V operation
Capacity 32GB (2 x 16GB)
Speed DDR4 2133 (PC4 17000)
This 32 GB kit contains two 16 GB DDR4 DIMMs that run at 2133 MHz with a CL15 latency. The modules operate at the standard 1.2 V and use the 288-pin unbuffered non-ECC form factor. They are built as a dual-channel kit and are tested for compatibility with a wide range of desktop systems from major manufacturers.
Each module uses a dual-rank 2Rx8 organisation, which helps maintain steady throughput when the memory controller keeps multiple banks open during long workloads. The JEDEC-standard 1.2 V voltage keeps power draw predictable, so temperatures remain stable without requiring extra cooling. Testing at the rated 2133 MHz frequency ensures consistent performance over extended sessions.
The DIMMs follow the standard 288-pin DDR4 layout, so they seat in any desktop DDR4 slot with the usual alignment notch. Because the kit is unbuffered and non-ECC, it works in consumer motherboards that do not support registered or error-correcting memory. Verifying the motherboard’s qualified-vendor list before purchase avoids the most common compatibility issue.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The modules operate at the standard DDR4 voltage of 1.2 V, so power draw and heat output stay low during continuous use.
Your board needs DDR4 DIMM slots that accept 288-pin unbuffered non-ECC memory and support dual-channel operation.
Mixing ranks is possible but not guaranteed; the system will run at the slowest module's speed and may require manual timing adjustment.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?