NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
32 GB DDR3L 1333 ECC LRDIMM module with 4Rx4 organisation and 1.35 V operation
This 32GB DDR3L 1333MHz ECC LRDIMM module is built for servers and workstations that require registered, load-reduced memory. It operates at 1.35V with CL9 latency and uses a 4Rx4 configuration. The 240-pin DIMM fits standard DDR3 slots in compatible enterprise systems.
This module serves as a direct replacement for the Micron MT72KSZS4G72LZ-1G4E2A7 part number. The upgrade is worthwhile when your qualified vendor list references this specific Micron SKU and you need to expand capacity or replace a failed stick. Systems requiring non-ECC or standard unbuffered DIMMs will not accept this module.
Confirm your motherboard or server chassis supports DDR3L 1.35V Load Reduced DIMMs with 4Rx4 organisation before ordering. Check the system's qualified vendor list for the Micron part number or an equivalent 32GB DDR3L 1333MHz ECC LRDIMM entry. Platforms limited to RDIMM, UDIMM or 1.5V DDR3 operation cannot use this memory.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MT72KSZS4G72LZ-1G4E2A7 |
| Capacity | 32GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Micron Chipset |
| Features | MT72KSZS4G72LZ-1G4E2A7 |
The module uses a 240-pin DDR3 DIMM form factor, matching standard server slots that accept DDR3L LRDIMMs.
Align the notch on the 240-pin edge connector with the key in the slot, press firmly until both retention clips click, and ensure the 1.35 V DDR3L voltage is supported by the platform.
Replace the module if memory diagnostics report uncorrectable ECC errors, the system fails to recognise the full 32 GB capacity, or the server exhibits repeated crashes linked to memory faults.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?