Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

A-Tech

A-Tech 32GB DDR4 2133MHz ECC LRDIMM 4Rx4 Server RAM

SKU CH-V2G8-N1820

32GB DDR4 2133MHz ECC LRDIMM server module with 4Rx4 ranks, CL15 latency and 1.2V operation

  • Capacity32GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 32GB capacity expands server memory for heavier workloads
  • DDR4 2133MHz PC4-17000 speed delivers fast data throughput
  • ECC LRDIMM with 4Rx4 rank corrects errors and reduces electrical load
  • 20V operation lowers power draw per module
  • 288-pin DIMM form factor fits standard DDR4 server slots

32GB DDR4 ECC LRDIMM server memory

This 32GB DDR4 module runs at 2133MHz with CL15 latency and operates at 1.20V. It uses a 288-pin DIMM form factor and is built with Micron chipset components. The module is a direct replacement for Micron MTA72ASS4G72LZ-2G1A1HG and MTA72ASS4G72LZ-2G1A1IG part numbers.

Load Reduced 4Rx4 architecture for high-density

The single specification that determines fit is the 4Rx4 Load Reduced DIMM organisation. This rank and buffer configuration must match the server memory controller requirements exactly; standard RDIMM or UDIMM modules will not work in the same slots.

Low-voltage operation at 1.2V reduces heat output

Running at the standard DDR4 voltage of 1.20V keeps power draw and thermal load low during normal server workloads. The Load Reduced buffer design minimises electrical loading on the memory bus, contributing to stable operation without active cooling on the module itself.

Erősségek

  • 32GB capacity expands server memory for heavier workloads
  • DDR4 2133MHz PC4-17000 speed delivers fast data throughput
  • ECC LRDIMM with 4Rx4 rank corrects errors and reduces electrical load
  • 20V operation lowers power draw per module
  • 288-pin DIMM form factor fits standard DDR4 server slots

Műszaki adatok

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA72ASS4G72LZ-2G1A1HG, MTA72ASS4G72LZ-2G1A1IG
Capacity32GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMicron Chipset
FeaturesMTA72ASS4G72LZ-2G1A1HG, MTA72ASS4G72LZ-2G1A1IG

Kérdések a termékről

Will the 2133 MHz speed actually run at that rate once installed in a server?

The module is rated for DDR4 2133 MHz (PC4-17000). It will operate at that speed provided the platform supports DDR4-2133; otherwise the memory controller will downclock it to the highest supported frequency.

What does the LRDIMM 4Rx4 designation mean for the memory controller?

LRDIMM (Load Reduced DIMM) with 4Rx4 organisation uses a buffer to reduce electrical load on the memory bus, allowing higher capacities per channel while presenting only a single logical rank to the controller.

Does the 288-pin DIMM fit every DDR4 server slot?

This module uses the standard DDR4 288-pin DIMM form factor. It fits any server or workstation slot wired for DDR4 LRDIMM; verify your system’s qualified-vendor list for 4Rx4 LRDIMM support before installing.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.