BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027736BTC
Raktáron
A-Tech
A-Tech 4GB DDR3 1333MHz PC3-10600 CL9 1.5V CMX8GX3M2A1333C9 Desktop RAM
A 4GB DDR3 desktop memory module running at 1333MHz with CL9 latency and 1.5V operation
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- Tested Frequency1333
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- 4GB capacity lets you run more programs at once
- DDR3 1333 MHz speed matches PC3-10600 standard
- CL9 latency and 1.5V voltage follow DDR3 specification
- 240-pin DIMM form factor fits desktop memory slots
- Non-ECC unbuffered design works with standard desktop motherboards
Replacement DDR3 Module
This A-Tech 4 GB DDR3 DIMM runs at 1333 MHz with a CL9 latency and standard 1.5 V operation. It is built as an unbuffered, non-ECC module using major-brand components and carries a 240-pin form factor. The stick is tested as a direct replacement for the Corsair CMX8GX3M2A1333C9 part number.
Compatibility Check
The module suits desktops that accept DDR3 1333 memory in a 240-pin slot and require 1.5 V unbuffered DIMMs. Systems that need ECC, registered memory, a different voltage, or a different DDR generation will not work with this part. Verify your motherboard specifications before ordering.
Deciding Specification
The 240-pin DDR3 interface at 1.5 V is the single detail that determines whether this module fits your board. If your system calls for DDR3 1333 unbuffered DIMMs with CL9 timing, this 4 GB stick matches that requirement.
Erősségek
- 4GB capacity lets you run more programs at once
- DDR3 1333 MHz speed matches PC3-10600 standard
- CL9 latency and 1.5V voltage follow DDR3 specification
- 240-pin DIMM form factor fits desktop memory slots
- Non-ECC unbuffered design works with standard desktop motherboards
Műszaki adatok
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Corsair |
| Model | CMX8GX3M2A1333C9 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| Tested Frequency | 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | CMX8GX3M2A1333C9 |
| Recommend Use | Compatible Replacement for Corsair CMX8GX3M2A1333C9 |
Kérdések a termékről
Does this 240-pin DDR3 DIMM require a motherboard with a 240-pin DDR3 slot?
Yes, the module is a 240-pin DDR3 DIMM and must be installed in a matching 240-pin DDR3 slot on the motherboard.
If I keep my current DDR3 memory, will this 1333 MHz CL9 1.5V module run at the same speed and timing?
The system will operate all installed DDR3 modules at the lowest common speed and highest common latency, so this 1333 MHz CL9 stick will downclock if paired with slower memory.
How can I confirm the module is running at 1333 MHz and CL9 after installation?
Check the memory frequency and CAS latency reported in the BIOS or a system-information tool such as CPU-Z to verify 1333 MHz and CL9 operation.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
