Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green rectangular circuit board with gold edge connector and black memory chips

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 Server Memory

SKU CH-WC2J-CQ500

4GB DDR3 1333MHz ECC registered DIMM for server upgrades, 2Rx4 with major-brand chips

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3 design
  • 1333 MHz DDR3 speed matches PC3-10600 server specs
  • 4 GB capacity on a single 240-pin DIMM module
  • 50 V standard voltage keeps power draw stable
  • Replaces Hynix HMT151R7AFP4C-H9 and related part numbers

Direct Hynix Replacement

This A-Tech 4 GB DDR3 module is built as a drop-in equivalent for Hynix HMT151R7AFP4C-H9, HMT151R7BFR4C-H9 and HMT151R7TFR4C-H9 parts. It targets administrators upgrading or repairing registered-ECC server and workstation platforms that require 240-pin DDR3 1333 MHz memory.

Registered ECC DIMM for Multi-Module Arrays

The 2Rx4 registered design places a register on the command bus, reducing electrical load on the memory controller so larger populations of DIMMs can run stably at 1.5 V. Systems that accept unbuffered UDIMMs or non-ECC memory cannot use this module; verify the platform specifically supports registered ECC RDIMMs before installation.

Tested Module with Lifetime Coverage

Every stick passes A-Tech’s validation suite before shipping, ensuring the major-brand chips meet the stated CL9 latency and PC3-10600 timing. A lifetime warranty and US-based technical support are included, giving administrators a direct path for troubleshooting or replacement if a fault appears in service.

Erősségek

  • ECC protection guards data integrity with registered DDR3 design
  • 1333 MHz DDR3 speed matches PC3-10600 server specs
  • 4 GB capacity on a single 240-pin DIMM module
  • 50 V standard voltage keeps power draw stable
  • Replaces Hynix HMT151R7AFP4C-H9 and related part numbers

Műszaki adatok

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kérdések a termékről

Does the registered design and CL9 latency limit throughput on a 1333MHz bus under sustained load?

The module runs at 1333MHz with CL9 timing and registered buffering, which adds one cycle of address/command delay but keeps throughput steady on a PC3-10600 bus.

How much heat and power does a 1.5V registered DIMM produce when running continuously?

At 1.5V standard DDR3 voltage the 4GB RDIMM draws typical DDR3 power and generates moderate heat; registered buffering adds minimal extra dissipation.

What motherboard slot and chipset support are required for this 240-pin DDR3 RDIMM?

A 240-pin DDR3 DIMM slot with registered ECC support in the chipset is required; the module uses major-brand chips at 1.5V.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.