Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 240-pin DDR3 DIMM with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1866 ECC RDIMM 1Rx4 Server Memory 733484-001

SKU CH-0R8E-K4ZYS

A 4 GB DDR3 1866 MHz ECC registered DIMM with 1Rx4 organisation and CL13 latency for HP 733484-001 servers

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server multitasking headroom
  • 1866MHz DDR3 speed accelerates data throughput
  • ECC registered design protects critical workloads
  • 1Rx4 single-rank layout optimises signal integrity
  • 240-pin DIMM fits standard DDR3 server slots

4GB DDR3 1866 ECC RDIMM

This 4GB registered ECC module is built for server and workstation platforms that require DDR3 1866 registered memory. It suits administrators upgrading HP systems using part number 733484-001 or similar validated configurations. The single-rank 1Rx4 organisation keeps electrical loading low on populated channels.

Capacity and headroom

At 4GB per module the stick adds modest capacity for memory-bound services such as virtualization hosts or database buffers. CL13 latency at 1866 MT/s delivers predictable throughput for typical enterprise workloads. The limit appears when applications demand more than a few gigabytes per channel or require higher frequencies than DDR3 1866 provides.

Build integration

The 240-pin DIMM installs in standard DDR3 registered slots and operates at the standard 1.5V. Registered signalling reduces load on the memory controller, freeing electrical headroom for additional modules on the same channel. Systems must support ECC RDIMM operation; consumer boards without registered-buffer support cannot use this module.

Erősségek

  • 4GB capacity expands server multitasking headroom
  • 1866MHz DDR3 speed accelerates data throughput
  • ECC registered design protects critical workloads
  • 1Rx4 single-rank layout optimises signal integrity
  • 240-pin DIMM fits standard DDR3 server slots

Műszaki adatok

BrandA-Tech
SeriesCompatible Replacement for HP
Model733484-001
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
Features733484-001

Kérdések a termékről

Will this DDR3 1866 RDIMM run at 1866 MHz alongside older DDR3 modules rated at lower speeds?

The module operates at DDR3 1866 (PC3-14900) with CL13 latency at 1.5V. When mixed with slower DDR3 DIMMs, the system typically clocks all memory down to the lowest common speed and loosest timings.

How can I confirm the ECC registered function is active after installing this 1Rx4 module?

Enter the server BIOS or UEFI and check the memory configuration screen; it should report ECC enabled and show the module as registered (RDIMM) with 1Rx4 organization and the correct 4GB capacity.

Does the box contain only the 240-pin DIMM or are any cables or brackets included?

The package includes the single 4GB DDR3 1866 ECC RDIMM (240-pin DIMM) only. No cables, brackets, heatsinks or additional accessories are supplied.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.