Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green rectangular DDR3 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1600 ECC UDIMM 2Rx8 Server RAM

SKU CH-J67B-TDMKV

An 8 GB DDR3 1600 ECC unbuffered DIMM with CL11 timing and 1.5 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8 GB capacity expands server memory headroom
  • DDR3 1600 MHz speed accelerates data throughput
  • ECC unbuffered design protects data integrity
  • 5 V standard voltage ensures broad compatibility
  • 240-pin DIMM form factor fits standard server slots

Server memory for ECC workloads

This 8 GB DDR3 module runs at 1600 MHz with CL11 latency and 1.50 V operation. It uses an unbuffered ECC design in a 2Rx8 configuration suited for server and workstation boards that require error correction. The 240-pin DIMM format matches standard DDR3 slots on compatible platforms.

Straightforward DIMM installation

The module seats in any standard DDR3 DIMM slot without extra cables or tools. Because it is unbuffered ECC, the host system must explicitly support unbuffered ECC memory; registered or non-ECC boards will not work with this stick. Verify the motherboard manual lists unbuffered ECC DDR3 before fitting.

Steady throughput under sustained load

ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute runs or virtualization workloads. The 1.50 V standard voltage keeps power draw predictable across extended sessions. Performance remains consistent as long as the platform memory controller supports the 1600 MHz data rate.

Erősségek

  • 8 GB capacity expands server memory headroom
  • DDR3 1600 MHz speed accelerates data throughput
  • ECC unbuffered design protects data integrity
  • 5 V standard voltage ensures broad compatibility
  • 240-pin DIMM form factor fits standard server slots

Műszaki adatok

BrandA-Tech
SeriesCompatible Replacement for Crucial
ModelCT102472BA160B
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesCT102472BA160B

Kérdések a termékről

How do I confirm the 8GB DDR3 1600 ECC UDIMM is running at PC3-12800 CL11 after installation?

Check the BIOS or a system tool such as CPU-Z; the memory tab should show 1600 MHz, CL11 timings, 1.50 V and ECC enabled for the installed module.

What comes in the box and what must I source separately for the 240-pin DIMM?

The package contains one 8 GB 2Rx8 DDR3 1600 ECC UDIMM; no cables, brackets or additional cooling are required — just an available 240-pin DDR3 slot on a compatible server or workstation board.

When should I choose this single 8 GB 2Rx8 module versus adding multiple sticks?

Select this module when your system has a free 240-pin DDR3 slot and the qualified vendor list approves 2Rx8 ECC UDIMMs; add a second identical stick only if your platform supports dual-channel population rules.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.