Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 240-pin DDR3 DIMM with black chips and a silver label

A-Tech

A-Tech 8GB DDR3 1866MHz ECC UDIMM 2Rx8 CL13 1.5V server RAM

SKU CH-V591-GVX29

An 8 GB DDR3 1866 MHz ECC UDIMM module with CL13 latency and 1.5 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity handles heavier server workloads
  • DDR3 1866MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • CL13 latency at 1.5V delivers responsive operation
  • 240-pin 2Rx8 module fits compatible IBM-Lenovo systems

8GB DDR3 ECC UDIMM for servers

This 8GB DDR3 1866MHz ECC UDIMM module is built for server and workstation systems that require error-correcting memory. It operates at PC3-14900 speed with CL13 latency and standard 1.5V voltage. The unbuffered design suits platforms that do not support registered DIMMs. Buyers who need registered memory or higher capacities per slot cannot use this module.

Thermals power and noise

As a memory module this product has no moving parts and generates no audible noise. Power draw is determined by the 1.5V DDR3 standard voltage and the 2Rx8 organisation. Thermal output is typical for DDR3 UDIMMs under normal server workloads. No active cooling or special airflow considerations are required beyond standard chassis ventilation.

240-pin build and daily handling

The module uses a 240-pin DIMM form factor with major brand chips and undergoes quality assurance testing for reliability. The 2Rx8 rank configuration fits standard DDR3 UDIMM slots in compatible IBM-Lenovo systems referencing part 4X70G00093. Installation follows normal DIMM alignment procedures. Systems limited to single-rank modules or non-ECC memory will not accept this part.

Erősségek

  • 8GB capacity handles heavier server workloads
  • DDR3 1866MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • CL13 latency at 1.5V delivers responsive operation
  • 240-pin 2Rx8 module fits compatible IBM-Lenovo systems

Műszaki adatok

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kérdések a termékről

How do I install this 240-pin DDR3 ECC UDIMM and what step is often missed?

Align the notch with the slot key, press straight down until both retention clips click, then verify the system BIOS recognises the full 8 GB capacity and ECC function.

What maintenance or replacement will this 1.5 V DDR3 module need over time?

No routine maintenance is required; keep air vents clear so the module stays within its rated thermal limits and replace only if a memory test reports correctable ECC errors.

What limit appears first when this CL13 1866 MHz kit runs sustained workloads?

The CL13 latency at 1866 MHz sets the throughput ceiling, so sustained bandwidth tops out at the PC3-14900 rating before thermal throttling becomes a factor.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.