Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green rectangular DDR3L server memory module with gold contacts and black chips

A-Tech

A-Tech 8GB DDR3L 1600 ECC RDIMM 2Rx8 1.35V MT18KSF1G72PDZ-1G6N1KF MT18KSF1G72PDZ-1G6P1 Server RAM

SKU CH-ZAJ4-1AE0W

An 8 GB DDR3L 1600 MHz ECC registered DIMM running at 1.35 V with CL11 latency for server workloads

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom
  • DDR3L 1600MHz speed accelerates data throughput
  • ECC RDIMM design detects and corrects memory errors
  • 35V low-voltage operation reduces power draw
  • 2Rx8 registered architecture supports high-density configurations

Server ECC RDIMM upgrade

This 8 GB DDR3L module is a registered ECC DIMM designed for server and workstation platforms that require error-correcting memory. It operates at 1600 MHz with a CAS latency of CL11 and runs at the low 1.35 V DDR3L voltage. The 2Rx8 rank organisation and Micron chipset match the Micron MT18KSF1G72PDZ-1G6N1KF and MT18KSF1G72PDZ-1G6P1 part numbers.

240-pin DDR3L slot requirement

The module fits a standard 240-pin DDR3 DIMM socket and requires a motherboard that supports registered ECC memory at the DDR3L 1.35 V level. Systems limited to unbuffered non-ECC DIMMs or to higher-voltage DDR3 cannot use this module. Builders must confirm that their platform accepts registered ECC DDR3L before installation.

Tested reliability assurance

Every unit undergoes quality-assurance testing to verify dependable operation in multi-module server configurations. The testing process is intended to reduce the risk of memory errors that can destabilise critical workloads. Buyers who need unbuffered memory or a different voltage should select an alternative module.

Erősségek

  • 8GB capacity expands server memory headroom
  • DDR3L 1600MHz speed accelerates data throughput
  • ECC RDIMM design detects and corrects memory errors
  • 35V low-voltage operation reduces power draw
  • 2Rx8 registered architecture supports high-density configurations

Műszaki adatok

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF1G72PDZ-1G6N1KF, MT18KSF1G72PDZ-1G6P1
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18KSF1G72PDZ-1G6N1KF, MT18KSF1G72PDZ-1G6P1

Kérdések a termékről

Will the 1.35V DDR3L voltage limit sustained throughput on a server running 24/7?

The module runs at 1.35V DDR3L, which is the standard low-voltage spec for DDR3 1600; sustained throughput is governed by the platform's memory controller and thermal design, not by the module voltage itself.

How much heat and noise does the 2Rx8 registered ECC DIMM add when the system runs all day?

The 8GB 2Rx8 registered ECC DIMM has no moving parts and draws low power at 1.35V; any extra heat or fan noise comes from the server chassis and CPU load, not from the memory stick itself.

What must my motherboard already support to use this 240-pin DDR3L 1600 ECC RDIMM?

The board must accept 240-pin DDR3L DIMMs at 1600 MHz, support ECC registered (RDIMM) modules, and be configured for 1.35V low-voltage operation.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.