Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 288-pin DDR4 UDIMM module with black chips

A-Tech

A-Tech 8GB DDR4 2400 ECC UDIMM 2Rx8 Server Memory

SKU CH-S7CW-DYSN7

8GB DDR4-2400 ECC UDIMM module with 2Rx8 organisation, CL17 latency and 1.2V operation for servers

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data corruption in critical workloads
  • DDR4 2400 speed with CL17 latency for responsive server performance
  • 20 V operation reduces power draw and heat output
  • 2Rx8 dual-rank design increases memory density per slot
  • 288-pin UDIMM form factor fits standard server motherboards

Server memory upgrade for workstations

This 8 GB DDR4 2400 module adds capacity to compatible servers and workstations. It uses an unbuffered ECC UDIMM design with a 2Rx8 organisation. The 288-pin DIMM operates at the standard 1.20 V DDR4 voltage.

Thermals and power in typical operation

The module runs at the JEDEC-standard 1.20 V, keeping power draw low during normal workloads. No active cooling is required on the DIMM itself. System airflow across the memory slots is sufficient for stable temperatures.

What the included specifications deliver

Major-brand chips and factory testing at CL17 latency provide verified reliability for error-correcting workloads. The PC4-19200 rating confirms the rated transfer speed. Lifetime warranty and US-based technical support cover the module after installation.

Erősségek

  • ECC protection prevents data corruption in critical workloads
  • DDR4 2400 speed with CL17 latency for responsive server performance
  • 20 V operation reduces power draw and heat output
  • 2Rx8 dual-rank design increases memory density per slot
  • 288-pin UDIMM form factor fits standard server motherboards

Műszaki adatok

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kérdések a termékről

How do I install the 288-pin DDR4 UDIMM and what step is often missed?

Align the notch with the motherboard key, press firmly until both retention clips click, then verify the module sits flush; the step often missed is fully seating both ends so the clips lock automatically.

What maintenance or replacement will this 8GB ECC module need over time?

No scheduled maintenance is required; if a correctable error count rises or the system logs uncorrectable ECC events, replace the module rather than attempting repair.

What limit appears first when this CL17 1.20V kit runs sustained workloads?

The DDR4 2400 bandwidth ceiling of PC4-19200 is reached before thermal throttling, so sustained throughput tops out at the rated transfer rate.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.