Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Rectangular black metal chassis with 23 vertical SATA drive slots and front control panel

Acumen Disc

Acumen Disc H23-SATA150 1-to-23 SATA Duplicator 150MB/s

SKU CH-5AR8-83ZC5

Standalone duplicator copies up to 23 SATA 3.5" or 2.5" drives at 150 MB/s with DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 23
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
  • Data Transfer Rate150MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 23

Data Transfer Rate 150MB/s

  • Duplicates up to 23 SATA drives simultaneously at 150MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Four erase modes including DoD 3-pass and 7-pass 5220.22-M standards
  • Standalone operation — no PC, software or host connection required
  • Accepts 3.5" and 2.5" SATA HDDs and SSDs without adapters

Standalone 23-Bay SATA Duplicator

The Acumen Disc H23-SATA150 copies up to 23 SATA hard drives or solid-state drives at 150 MB per second per slot. It operates without a host computer, using a four-button controller for quick-copy or whole-drive duplication. The unit also provides four erase modes, including DoD 3-pass and 7-pass sanitisation. Power input accepts 115 to 230 V AC at 50 or 60 Hz.

High-Volume Duplication and Sanitisation

IT departments and data-recovery labs that need to clone many SATA drives simultaneously will benefit from the 23 target bays and 9 GB per minute throughput. The quick-copy mode copies only essential files, while whole-drive mode creates a sector-by-sector image. Buyers who need to duplicate drives with interfaces other than SATA should look at different equipment.

150 MB/s Per-Port Transfer Rate

Each of the 23 slots delivers up to 150 MB per second, so total aggregate bandwidth scales with the number of populated bays. This rate determines how quickly large drives can be cloned or erased in standalone operation.

Erősségek

  • Duplicates up to 23 SATA drives simultaneously at 150MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Four erase modes including DoD 3-pass and 7-pass 5220.22-M standards
  • Standalone operation — no PC, software or host connection required
  • Accepts 3.5" and 2.5" SATA HDDs and SSDs without adapters

Műszaki adatok

BrandAcumen Disc
Part NumberH23-SATA150
TypeHard Drive Duplicator
Target1 to 23
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

What does the 150 MB/s transfer rate mean when the duplicator is running with all 23 target drives?

Each slot delivers up to 150 MB/s independently, so all 23 SATA drives can copy at that speed simultaneously.

The unit uses SATA I — what practical limit does that place on connected drives?

SATA I caps the interface at 150 MB/s, so faster SATA drives will be limited to that throughput during copy or erase operations.

Can 2.5-inch SSDs and 3.5-inch HDDs be inserted directly without extra hardware?

Yes, the slot-load racks accept both 2.5-inch and 3.5-inch SATA drives natively, with no adapter required.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.