Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green rectangular Feather RP2040 board with USB-C connector and NeoPixel LED

Adafruit

Adafruit Feather RP2040 engineering development tool

SKU CH-2JE3-352C6

Microcontroller board with dual-core RP2040, 264 KB RAM, 8 MB flash, USB-C bootloader, 200 mA LiPo charger and NeoPixel indicator

  • TypePrototyping Products
  • Dual-core RP2040 at ~125 MHz delivers fast 32-bit performance
  • 8 MB SPI flash stores CircuitPython and MicroPython code directly
  • Built-in 200 mA LiPoly charger powers projects from a battery
  • 12 MHz crystal ensures accurate timing for real-time tasks
  • USB Type C gives access to ROM bootloader and serial debugging

Feather RP2040 development board

The Feather RP2040 is a compact prototyping platform built around the RP2040 32-bit Cortex M0+ dual core running at ~125 MHz with 264 KB RAM. It targets engineers, students and hobbyists who need a ready-to-program microcontroller board for embedded projects, sensor integration or CircuitPython experimentation.

8 MB SPI flash storage

The single specification that decides fit is the 8 MB SPI flash chip, which holds firmware, libraries and CircuitPython or MicroPython scripts without requiring external EEPROM. Projects that demand larger onboard storage or a different memory interface will need another board.

USB-C power and lipoly charging

A USB Type C connector supplies 3.3 V logic power, exposes the ROM UF2 bootloader and provides a serial debug port. The built-in 200 mA+ lipoly charger with status LED enables battery-powered operation, while the RGB NeoPixel and pin 13 red LED give immediate visual feedback during development.

Erősségek

  • Dual-core RP2040 at ~125 MHz delivers fast 32-bit performance
  • 8 MB SPI flash stores CircuitPython and MicroPython code directly
  • Built-in 200 mA LiPoly charger powers projects from a battery
  • 12 MHz crystal ensures accurate timing for real-time tasks
  • USB Type C gives access to ROM bootloader and serial debugging

Műszaki adatok

TypePrototyping Products

Kérdések a termékről

How fast does the RP2040 dual-core processor run when the board is powered at 3.3 V?

The RP2040 Cortex-M0+ dual core runs at approximately 125 MHz at 3.3 V logic and power, with 264 KB of RAM available for your program and data.

What does the USB Type C connector allow me to do with the built-in bootloader?

The USB Type C connector gives access to the permanent ROM UF2 bootloader so the board appears as a USB disk drive; hold the BOOTSEL button while plugging in, then drag firmware files onto it.

What battery connector and charging current does the on-board lipoly charger support?

The built-in charger delivers 200 mA or more to a standard lipoly pack and includes a charging-status LED; no EEPROM is fitted, so persistent settings must use the 8 MB SPI flash.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.