Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Small transparent acrylic reservoir with black fittings, 49 by 49 by 56 millimetres, shown with gasket and four mounting screws

Alphacool

Alphacool DC-LT Individual Reservoir 13140 49x49x56mm liquid cooler

SKU CH-SBPM-F72RG

A compact 49x49x56mm acrylic reservoir that bolts onto a DC-LT pump top, adding fill capacity and a ¼‑inch port with a level indicator

  • TypeReservoir
  • Expands DC-LT pump with integrated reservoir
  • Transparent Röhm Plexiglas GS shows coolant level
  • Brass ¼-inch threads accept fittings or lighting
  • Compact 49x49x56mm footprint fits tight builds
  • Includes gasket, indicator and four mounting screws

Dedicated DC-LT Reservoir Module

This transparent reservoir attaches directly to an Alphacool DC-LT ceramic 12 Volt pump that already has a DC-LT Plexi top installed. It adds a compact fluid reserve to a custom liquid-cooling loop without requiring a separate mounting point. The 49 by 49 by 56 millimetre body weighs 141 grams and is made from Röhm Plexiglas GS and brass.

Compatibility Check Before Ordering

Verify that your existing DC-LT pump is fitted with the DC-LT Plexi top, because the reservoir mounts only to that specific top. Confirm you have a free ¼ thread port for the inlet or lighting module connection. Ensure the 49 by 49 by 56 millimetre footprint fits inside your case alongside the pump assembly. Note that the pump itself is not included with this module.

Included Hardware Expands Functionality

The package supplies the reservoir, a ring gasket, a fill-level indicator with its own gasket and four corner mounting screws for quick installation. Machined ¼ threads on the reservoir side accept standard fittings or an optional lighting module. A separate screw plug is recommended to seal the unused inlet opening. No coolant, tubing or pump is bundled.

Erősségek

  • Expands DC-LT pump with integrated reservoir
  • Transparent Röhm Plexiglas GS shows coolant level
  • Brass ¼-inch threads accept fittings or lighting
  • Compact 49x49x56mm footprint fits tight builds
  • Includes gasket, indicator and four mounting screws

Műszaki adatok

TypeReservoir

Kérdések a termékről

What comes in the box with the Alphacool DC-LT Individual Reservoir 13140 and do I need to buy a pump separately?

The box contains the reservoir, a gasket, a fill level indicator with its own gasket and four mounting screws. A DC-LT ceramic 12 V pump with a Plexi top is required and is not included.

Which version or capacity of this reservoir should I choose for my DC-LT pump?

This is a single 49x49x56 mm reservoir made from Röhm Plexiglas GS and brass with one G¼ thread and one fill level indicator port; no other capacities or versions are offered.

What does the 141 g weight mean once the reservoir is installed in my loop?

At 141 g the reservoir adds minimal mass to the DC-LT pump assembly, keeping the combined unit light enough for standard case mounting without extra support.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.