Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Black 90-degree revolvable barbed fitting with G1/4 thread and O-ring

Alphacool

Alphacool G1/4 13mm 90° Revolvable Barbed Fitting Deep Black 17139

SKU CH-YH0J-G3CPS

G1/4 90° revolvable barbed fitting for 13 mm tubing with O-ring in deep black finish

  • TypeFittings

Color/Size 13mm Black

  • High-flow inner diameter for unrestricted coolant movement
  • 90° revolvable design allows flexible tube routing
  • G1/4 thread with 13mm barbed connection fits standard tubing
  • Deep Black chromatised finish resists peeling and fading
  • Includes O-ring for a secure, leak-free seal

G1/4 90° Revolvable Fitting

The Alphacool 13mm barbed fitting connects soft tubing with a 13mm inner diameter to any component using a standard G1/4 thread. Its 90° revolvable design lets the elbow rotate freely after tightening, simplifying tube routing in tight loops. A deep black chromatised finish bonds to the brass body for lasting colour.

Builders needing a single 90° connection

This fitting suits custom loops that require one right-angled joint for 13mm ID tubing. It does not serve builds using smaller or larger tubing diameters, nor does it replace straight or multi-angle adapters. Buyers needing quick-disconnect or compression-style seals should look at other fitting types.

Sustained flow with minimal restriction

The wide inner bore maintains high flow rates during continuous pump operation, reducing pressure drop across the elbow. The revolvable joint stays aligned under vibration and thermal cycling, preventing kinks that would throttle coolant movement over long runs.

Erősségek

  • High-flow inner diameter for unrestricted coolant movement
  • 90° revolvable design allows flexible tube routing
  • G1/4 thread with 13mm barbed connection fits standard tubing
  • Deep Black chromatised finish resists peeling and fading
  • Includes O-ring for a secure, leak-free seal

Műszaki adatok

TypeFittings

A modell további verziói

2 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

What tubing inner diameter must I already have for the 13 mm barbed end to seal properly?

You need soft tubing with a 13 mm inner diameter; the barbed end is sized for that exact bore and the included O-ring seals against the G1/4 port.

Will the 90° revolvable elbow clear a radiator port that sits close to a motherboard heatsink?

The fitting rotates freely after tightening so you can orient the 90° bend away from nearby components, but the overall height is fixed by the 90° geometry.

How can I confirm the Deep Black finish is correctly seated and leak-free after installation?

Tighten the G1/4 thread until the O-ring compresses, then run the loop under pressure; no coolant should appear at the thread or barb junction.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.