Axiom
Axiom SSDEV20DE480-AX enterprise SSD 480 GB 2.5" SATA 600
A 480 GB 2.5" SATA 600 enterprise SSD with 525 MB/s read and 460 MB/s write speeds, hot-swap support and RoHS certification
- Enterprise storage with 480 GB capacity
- Fast reads at 525 MB/s over SATA 600
- Sustained writes at 460 MB/s for heavy workloads
- Hot-swap 2.5" design enables drive changes without downtime
- RoHS certified and backed by a 3-year warranty
Capacity and interface
The Axiom SSDEV20DE480-AX is a 480 GB enterprise solid-state drive built for 2.5 inch hot-swap bays. It connects through a SATA 600 interface and delivers sequential reads up to 525 MB/s with writes up to 460 MB/s. The drive carries RoHS certification and a three-year limited warranty.
Read-intensive workloads and hot-swap bays
This SSD suits servers and storage arrays that need reliable, read-oriented performance in a hot-swappable 2.5 inch form factor. It is not intended for workloads that demand sustained high write throughput or the lower latency of a PCIe-attached drive. Buyers who need greater capacity or a different physical interface should evaluate other options.
SATA 600 interface
The single specification that determines compatibility is the SATA 600 interface, which requires a matching 6 Gb/s host port and a standard 2.5 inch drive bay with hot-swap support. Verify that the target system provides both the correct connector and the mechanical latch before purchase.
Erősségek
- Enterprise storage with 480 GB capacity
- Fast reads at 525 MB/s over SATA 600
- Sustained writes at 460 MB/s for heavy workloads
- Hot-swap 2.5" design enables drive changes without downtime
- RoHS certified and backed by a 3-year warranty
Műszaki adatok
Ehhez a termékhez egyelőre nincs közzétett műszaki adat.
Kérdések a termékről
Will the 2.5 inch SATA 600 form factor fit in my existing hot-swap bays?
The drive uses a standard 2.5 inch form factor with a SATA 600 interface and is hot-swappable, so it will slide directly into compatible hot-swap bays that accept 2.5 inch SATA drives.
How can I verify the drive is performing at the rated 525 MB/s read and 460 MB/s write speeds after installation?
Run a sequential read/write benchmark such as CrystalDiskMark or fio against the raw device; sustained results near 525 MB/s read and 460 MB/s write confirm the EV200 is operating at spec.
Does the package include a drive tray or mounting screws, or must I supply them?
The drive is supplied as a bare 2.5 inch hot-swap module; any carrier tray, caddy or mounting screws required by your chassis must be sourced separately.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
