iDsonix USB3.0-A-1m SATA to USB 3.0 converter cable 1m
- Black
- USB 3.0
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
BGears
A 140 mm case fan with four blue LEDs moves up to 83 CFM at 1500 RPM while keeping noise to 29 dBA
The BGears b-ice is a 140mm case fan with a sleeve bearing and four blue LEDs built into the frame. It mounts in any standard 140mm location using the four screws supplied. A 3-pin connector plugs directly into a motherboard header for speed reporting and a 3-to-4-pin Molex adapter is included for direct power-supply connection.
At its rated 1500 RPM ±10% the fan moves up to 83 CFM ±10% while producing 29 dBA of noise. The blue chrome coating on both frame and blades reflects the LED light for a brighter visual effect. Because the bearing is a sleeve type, acoustic output remains steady during continuous operation rather than rising after a short spin-up.
Builders who want visible blue illumination inside the case gain lighting without adding a separate LED strip. The 3-pin header and Molex adapter cover both motherboard-controlled and always-on power scenarios. It is not suited for systems that require PWM speed control via a 4-pin header or for installations where a fluid-dynamic or ball bearing is specified for longer service life.
| Brand | Bgears |
|---|---|
| Model | b-ice 140mm |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Sleeve |
| RPM | 1500 RPM ±10% |
| Air Flow | 83.0 CFM ±10% (max) |
| Noise Level | 29 dBA |
| Power Connector | 3 Pin |
| Color | Blue |
| LED | Blue |
| Features | 4 x Blue LEDs 3 wires 3 pins connector directly connected to motherboard 4 pins Molex connector directly connected to Power Supplies Blue Chrome Coating on Frame and Blades Low Noise Level with Extreme Airflow Shining Surface Enhances Better Lighting Effect 140mm to 120mm Fan Adapter Sold Separately 4 screws and a 3 to 4 pins adapter included Rated Voltage: DC 12V Operating Voltage: 10.2-13.8 VDC Operating Temp.: -10°C to +70°C Weight: 150g |
| Dimensions | 140 x 140 x 25 mm |
| Szállítási súly | 0.13 kg |
| Csomagméret | 226 × 168 × 39 mm |
The b-ice 140mm produces 29 dBA at its rated 1500 RPM speed, which is a low noise level suitable for continuous operation.
It plugs into any standard 3-pin or 4-pin motherboard fan header; a 3-to-4-pin Molex adapter is also included for direct power-supply connection.
The fan measures 140 x 140 x 25 mm, matching the standard 140mm mounting pattern used on many older cases.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?