Brute Networks
Brute Networks 16GB DDR4-2933 2Rx8 1.2v 288-Pin Server RAM
Registered DDR4 ECC module adds 16 GB at 2933 MHz with 1.2 V operation for HPE-compatible servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2933 (PC4 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB DDR4-2933 registered ECC memory for reliable server workloads
- 2Rx8 dual-rank organisation increases memory density per channel
- 2 V low-voltage operation reduces power draw in dense configurations
- 100 % HPE P19255-001 compatible for drop-in upgrades
- Major-brand Samsung, SK Hynix or Micron chips validated for OEM warranty retention
HPE Compatible 16GB DDR4-2933 Server Module
This 16GB registered DDR4-2933 module is built for HPE servers that require PC4-23400 memory. It uses major-brand chips from Samsung, SK Hynix or Micron and runs at 1.20V with ECC protection.
Who This Suits And Who Should Look Elsewhere
IT teams maintaining HPE infrastructure needing guaranteed compatibility and matched modules for multi-DIMM configurations will benefit. Buyers who want more storage capacity per slot or systems requiring unbuffered memory should look elsewhere.
2Rx8 Registered ECC DDR4-2933 At 1.20V
The dual-rank 2Rx8 registered ECC design operating at DDR4-2933 and 1.20V is the specification that determines whether this module matches your server memory requirements.
Erősségek
- 16 GB DDR4-2933 registered ECC memory for reliable server workloads
- 2Rx8 dual-rank organisation increases memory density per channel
- 2 V low-voltage operation reduces power draw in dense configurations
- 100 % HPE P19255-001 compatible for drop-in upgrades
- Major-brand Samsung, SK Hynix or Micron chips validated for OEM warranty retention
Műszaki adatok
| Brand | HPE |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Kérdések a termékről
What speed does the DDR4-2933 interface actually run at in a server?
The module runs at DDR4-2933 (PC4-23400) when the server memory controller supports that data rate; otherwise it downclocks to the highest speed the platform allows.
What physical slot and clearance does this 288-pin registered DIMM need?
It requires a standard 288-pin DDR4 RDIMM slot; the registered buffer adds slight height, so verify your server chassis or heatsink clearance before installing.
How do I install this HPE-compatible module and what step is often missed?
Power down, open the chassis, align the notch with the keyed slot, press firmly until both ejector clips click, then confirm the server BIOS recognises the full 16 GB capacity.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.



