BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277053BTC
Raktáron
Brute Networks
Brute Networks 32GB DDR4 2133 ECC LRDIMM 4Rx4 CL15 UCS-MR-1X322RU-G-BN
32GB DDR4 2133 ECC LRDIMM with 4Rx4 CL15 timing for Cisco server upgrades
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 32 GB capacity supports dense virtualisation workloads
- DDR4-2133 speed delivers 17000 MB/s bandwidth
- ECC registered design corrects errors for uptime
- 4Rx4 organisation maximises rank density per slot
- 20 V operation reduces server power draw
Cisco-compatible 32GB DDR4 LRDIMM
This 32GB DDR4 2133 LRDIMM is built for Cisco UCS servers needing registered ECC memory. It runs at PC4-17000 with CL15 timing and a 1.20V supply. The 4Rx4 organisation fits 288-pin slots and uses major-brand DRAM from Samsung, SK Hynix or Micron.
Upgrade from smaller or slower DIMMs
Replacing lower-capacity RDIMMs or slower DDR4 modules with this 32GB LRDIMM increases per-slot density while keeping registered ECC operation. The jump is worth it when your chassis has limited slots and the platform supports load-reduced modules at 2133 MT/s.
Suits Cisco UCS maintenance and expansion
Ideal for administrators extending the life of qualified Cisco UCS platforms with matched, validated modules. Not suited for consumer desktops, workstations without registered ECC support, or systems that require unbuffered DDR4 or a different data rate.
Erősségek
- 32 GB capacity supports dense virtualisation workloads
- DDR4-2133 speed delivers 17000 MB/s bandwidth
- ECC registered design corrects errors for uptime
- 4Rx4 organisation maximises rank density per slot
- 20 V operation reduces server power draw
Műszaki adatok
| Brand | Cisco |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
Kérdések a termékről
Does the 288-pin DDR4 LRDIMM fit a standard server DIMM slot?
Yes, the 288-pin form factor matches standard DDR4 server DIMM slots used in compatible Cisco UCS systems.
What BIOS setting or installation step is critical for the 4Rx4 registered ECC modules?
Install modules in the correct slot population order per the server manual so the memory controller initialises all four ranks per DIMM.
When should the 32GB 1.20V DDR4-2133 modules be replaced?
Replace them if memory diagnostics report uncorrectable ECC errors or if a capacity upgrade beyond 32GB per slot is required.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
