Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR3 DIMMs with gold contacts and black chips

Computer Memory Solutions

Computer Memory Solutions 16GB 2x8GB DDR3 1333 ECC Registered DIMM

SKU CH-FQXM-TRHNF

16 GB DDR3-1333 ECC registered dual-rank kit for Dell PowerEdge R410 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • ECC registered design protects data integrity in Dell PowerEdge R410 servers
  • 16 GB dual-channel kit (2 × 8 GB) doubles throughput for virtualised workloads
  • DDR3-1333 CL9 timing matches factory spec for stable 1.5 V operation
  • 240-pin RDIMM form factor drops straight into 410 memory slots without adapters
  • Automatically clocks to 1066 MHz or 800 MHz per Xeon configuration for guaranteed compatibility

Server Memory Upgrade

This 16GB kit contains two 8GB DDR3 registered ECC DIMMs built for the Dell PowerEdge R410. The modules run at 1333MHz with CL9 timing and 1.5V voltage. They are intended for administrators who need to expand memory capacity in that specific server platform.

Capacity and Speed Context

The kit adds 16GB toward the system maximum of 128GB across eight slots. Population rules mean the modules will clock down to 1066MHz or 800MHz depending on the installed Xeon processor and how many banks are filled. The upgrade is worthwhile when the workload demands more memory than the current configuration provides and the platform population limits are observed.

Platform Constraints

The R410 memory controller reduces speed to 1066MHz for quad-rank modules in the first dual-channel bank and to 800MHz in the second bank, while the third bank is disabled. Mixing registered ECC with unbuffered ECC modules is not supported. Buyers who need higher speeds, larger per-module capacities, or different memory generations cannot use this kit.

Erősségek

  • ECC registered design protects data integrity in Dell PowerEdge R410 servers
  • 16 GB dual-channel kit (2 × 8 GB) doubles throughput for virtualised workloads
  • DDR3-1333 CL9 timing matches factory spec for stable 1.5 V operation
  • 240-pin RDIMM form factor drops straight into 410 memory slots without adapters
  • Automatically clocks to 1066 MHz or 800 MHz per Xeon configuration for guaranteed compatibility

Műszaki adatok

BrandComputer Memory Solutions
ModelCM10247210600ECCR2R4H
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge R410
Package Content2 Memory RAM Sticks

Kérdések a termékről

Will the 240-pin DDR3 DIMMs fit the Dell PowerEdge R410 memory slots?

Yes, the 240-pin DDR3 form factor matches the R410's registered DIMM slots exactly.

What is the correct installation order for the 2Rx4 registered modules in the R410?

Populate the first bank of each CPU first; the system disables the third bank if quad-rank modules are used.

Will these 1.5V ECC registered modules require any firmware updates over their service life?

No firmware updates are needed for the memory itself; only a BIOS update may be required if new Xeon processors are installed later.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.