Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1600 CL11 1.5V 240-Pin Kit
16 GB DDR3 kit (2 × 8 GB) running at 1600 MHz CL11 1.5 V for HP Envy 700-210xt, 700-215tx and 700-230 desktops
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- 16GB dual-channel kit boosts multitasking on HP Envy 700 desktops
- DDR3 1600 CL11 timing delivers responsive performance at 1.5V
- Non-ECC unbuffered 240-pin DIMMs install without configuration
- 2Rx8 major-brand chips ensure stable operation in 2-slot or 4-slot systems
- Guaranteed compatible with Envy 700-210Xt, 700-215Xt and 700-230 models
Targeted upgrade for HP Envy desktops
This 16 GB kit contains two 8 GB DDR3 modules validated for HP Envy 700-210Xt, 700-215Xt and 700-230 systems. It is intended for owners of those specific models who want to reach the platform memory ceiling without compatibility guesswork. Builders using other motherboards or newer DDR generations cannot use this kit.
DDR3 1600 ceiling and dual-channel limit
The memory runs at 1600 MHz with CL11 timings and 1.5 V, which is the standard ceiling for this DDR3 tier. The Envy 700-210Xt and 700-215Xt only provide two DIMM slots and a 16 GB maximum, so this kit fills every slot and hits the hard capacity limit. The 700-230 offers four slots and a 32 GB ceiling, leaving two slots free for a future matched pair.
Replaces factory 4 GB or 8 GB configurations
Most of these desktops shipped with 4 GB or 8 GB in one or two slots, leaving headroom on the 700-230 but saturating the smaller models. The jump is worth it when the system slows under multitasking, browser tabs or light creative workloads and the board still has free slots or accepts higher-density modules. It does not help workloads that need ECC, registered DIMMs or speeds beyond DDR3 1600.
Erősségek
- 16GB dual-channel kit boosts multitasking on HP Envy 700 desktops
- DDR3 1600 CL11 timing delivers responsive performance at 1.5V
- Non-ECC unbuffered 240-pin DIMMs install without configuration
- 2Rx8 major-brand chips ensure stable operation in 2-slot or 4-slot systems
- Guaranteed compatible with Envy 700-210Xt, 700-215Xt and 700-230 models
Műszaki adatok
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp Envy Desktop Hp Envy 700-210Xt, 700-215Xt, 700-230 |
| Package Content | 2 Memory RAM Sticks |
Kérdések a termékről
Should I pick the 16 GB kit or the 32 GB maximum for my Envy 700-230?
The 700-230 desktop has four sockets and supports up to 32 GB, so this 16 GB kit fills half the slots and leaves room to add another pair later.
What does the DDR3 1600 rating deliver in my Envy 700-210Xt?
The modules run at 1600 MHz with CL11 timing, matching the speed the 700-210Xt expects for its two-slot, 16 GB maximum configuration.
Will the 240-pin DDR3 interface work in my HP Envy 700-215Xt?
Yes, the 240-pin DDR3 DIMMs are the exact form factor and voltage the 700-215Xt requires for its two memory sockets.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.



