Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Four green DDR3 ECC registered DIMM sticks in a set

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR3 1333 ECC Registered DIMM memory upgrade

SKU CH-JY98-TKGQ6

A 16 GB quad-channel kit of registered ECC DDR3-1333 DIMMs validated for Dell PowerEdge M710 servers

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB total capacity across four 4 GB modules
  • ECC registered design protects data integrity in server workloads
  • DDR3 1333 speed with CL9 timing for stable operation
  • 5 V voltage matches Dell PowerEdge M710 requirements
  • 240-pin DIMM form factor fits the server's memory slots

Server memory kit

This 16 GB kit contains four 4 GB registered ECC DDR3 DIMMs rated at 1333 MHz with CL9 timing. It is built for the Dell PowerEdge M710 and carries a limited lifetime warranty when purchased directly from Computer Memory Solutions.

Build fit

The modules use a 240-pin DDR3 interface and run at 1.5 V, matching the M710’s registered memory requirement. The system accepts up to 18 DIMM sockets across six triple-channel banks, so this four-module kit leaves ample room for further expansion up to the platform maximums of 192 GB or 288 GB depending on rank configuration.

What the bundle changes

A matched quad-kit enables triple-channel bandwidth when populated in banks of three, and the identical modules avoid the bank-level mixing restrictions that apply to x4 versus x8 DRAM variants. Registered ECC operation is maintained throughout, and the memory will automatically clock down to 1066 MHz or 800 MHz based on the installed Xeon and bank population.

Erősségek

  • 16 GB total capacity across four 4 GB modules
  • ECC registered design protects data integrity in server workloads
  • DDR3 1333 speed with CL9 timing for stable operation
  • 5 V voltage matches Dell PowerEdge M710 requirements
  • 240-pin DIMM form factor fits the server's memory slots

Műszaki adatok

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemDell Poweredge M710
Package Content4 Memory RAM Sticks

Kérdések a termékről

Will the 1333 MHz rated speed hold when all 18 DIMM sockets are populated on the PowerEdge M710?

The modules automatically clock down to 1066 MHz or 800 MHz depending on the Xeon model and how many banks are filled, so sustained full-population operation runs below the rated 1333 MHz.

Does the 1.5 V registered design add noticeable heat or fan noise during 24/7 server duty?

Registered ECC DIMMs at 1.5 V are standard for this platform and draw normal server-memory power; no extra cooling or noise beyond the system's existing airflow design is required.

Must the PowerEdge M710 already have a specific Xeon installed for this 4×4 GB kit to function?

The kit is validated for the M710; any supported Xeon will work, though the CPU model determines whether the memory runs at 1333, 1066 or 800 MHz.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.