Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

Computer Memory Solutions

Computer Memory Solutions CM512648500SODRH 8GB (2x4GB) DDR3 1066MHz SO-DIMM memory upgrade

SKU CH-YA3E-HT85Q

Dual-channel 8 GB kit of DDR3 1066 MHz SO-DIMMs for compatible Apple iMac Core i3/i5/i7 systems

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB kit (2×4 GB) doubles iMac memory
  • DDR3 1066 MHz PC3-8500 matches factory spec
  • CL7 7-7-7 timing keeps latency low
  • 5 V unbuffered non-ECC fits stock slots
  • 204-pin SO-DIMM installs in both iMac sockets

System-specific DDR3 SO-DIMM kit

This 8 GB kit contains two 4 GB DDR3 SO-DIMM modules rated at 1066 MHz (PC3-8500). It is built for Apple iMac models that shipped with Core i3, i5 or i7 processors and DDR3 memory controllers. The unbuffered, non-ECC design matches the original specification for those systems.

DDR3 1066 MHz interface limits

The modules run at 1.5 V with CL7 7-7-7 timings and a 2Rx8 organisation. The iMac platform supports a maximum of 16 GB across its two sockets, so this kit fills half the total capacity. Faster DDR3 1333 MHz memory will down-clock to 1066 MHz on this platform.

Straightforward two-module install

Installation requires opening the iMac memory door and seating both 204-pin sticks firmly until the latches click. The main risk is inserting only one module or not pressing hard enough, which leaves the system running in single-channel mode or failing to boot. Picture shown is for reference only; actual module appearance may vary.

Erősségek

  • 8GB kit (2×4 GB) doubles iMac memory
  • DDR3 1066 MHz PC3-8500 matches factory spec
  • CL7 7-7-7 timing keeps latency low
  • 5 V unbuffered non-ECC fits stock slots
  • 204-pin SO-DIMM installs in both iMac sockets

Műszaki adatok

BrandComputer Memory Solutions
ModelCM512648500SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Imac Core I3 I5 I7
Package Content2 Memory RAM Sticks

Kérdések a termékről

Should I choose the 8GB kit or look for a larger capacity?

The kit provides 8GB total as two 4GB modules; the iMac accepts a maximum of 16GB across its two slots so you can add another identical kit later if needed.

What does the 1066MHz rating mean once installed in my iMac?

The modules run at DDR3-1066 with CL7 timing at 1.5V; the iMac's memory controller will operate them at this speed even though the system also supports 1333MHz memory.

Does the 204-pin SO-DIMM interface limit performance in this iMac?

The 204-pin SO-DIMM form factor matches the iMac's slots exactly; the PC3-8500 rating sets the module's maximum transfer rate.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.