Corn Electronics GR701 E-ATX PC case, 420 mm radiator, 4×140 mm fans, Janna edition
- ATX Full Tower
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Corn Electronics
Full-tower case supports E-ATX boards, dual 420 mm radiators, four pre-installed 140 mm PWM fans, a metal GPU holder, front USB 4.0 Type-C and 60 W fast charging, with tempered glass on both sides
Options ROG Se7en
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
The Corn Electronics GR701 E-ATX full-tower case supports motherboards up to 12 by 10.9 inches, plus ATX, Micro-ATX and Mini-ITX. It provides five dedicated 2.5-inch bays and two combo bays that accept either 2.5-inch or 3.5-inch drives. Nine horizontal expansion slots and three additional vertical slots give ample room for multiple graphics cards or add-in cards. The design targets builders who want extensive internal volume and flexible drive layouts.
Dual 420 mm radiator mounts at the front and top allow large liquid-cooling loops to dissipate heat over long sessions without throttling. Three pre-installed 140 mm PWM fans at the front and one at the rear move substantial airflow across components, while the 34 mm cable-management space keeps routing tidy for unobstructed circulation. Removable dust filters on the front, top and bottom maintain clean intake surfaces during extended operation. The case suits workloads that demand continuous high airflow rather than short bursts.
Tempered glass on both side panels showcases the interior while containing fan noise within the chassis. The included ARGB fan hub centralises lighting control without adding audible components. A front-panel 60 W fast-charging USB port delivers power to peripherals independently of the motherboard. With a maximum CPU cooler height of 190 mm and GPU length of 460 mm, large air coolers and graphics cards fit without forcing fans into restrictive positions that increase noise.
| Model | international version |
|---|---|
| Type | ATX Full Tower |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Four pre-installed 140 mm PWM fans and support for up to 420 mm radiators front and top give strong airflow headroom, so the case stays cool and quiet under sustained loads.
The case accepts E-ATX boards up to 12 by 10.9 inches, ATX, Micro-ATX and Mini-ITX, plus PSUs up to 240 mm long, so most standard components mount directly.
Front and top mounts each support 360 mm and 420 mm radiators, GPU clearance is 460 mm, and CPU cooler height allowance is 190 mm, so most current water-cooling loops and long cards fit.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?