DELL
DELL CK3MN 2TB 2.5" SATA 7200 RPM internal hard drive
A 2TB 2.5" SATA internal hard drive spinning at 7200 RPM with a 6.0Gb/s interface for desktop storage
- InterfaceSATA 6.0Gb/s
- Capacity2TB
- RPM7200 RPM
- Form Factor2.5"
- 2TB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers responsive data access
- SATA 6.0Gb/s interface provides fast transfer rates
- 5-inch form factor fits compact desktop bays
- 512n sector format ensures broad system compatibility
Dell CK3MN 2TB 2.5" SATA internal hard drive
The Dell CK3MN is a 2TB 2.5" internal hard drive with a SATA 6.0Gb/s interface spinning at 7200 RPM. It uses a 512n disk format and is supplied as a new original Dell part. The drive is designed for desktop systems that accept a 2.5" SATA device.
Sustained workload behaviour
At 7200 RPM the drive delivers consistent rotational speed for continuous read and write operations. The SATA 6.0Gb/s interface supports a 600 MB/s maximum bus transfer rate. Mechanical latency and platter density determine real-world throughput during long transfers.
Installation notes
The 2.5" form factor requires a compatible drive bay or a 3.5" adapter bracket in many desktop chassis. Hot-swap capability depends on the host backplane and caddy supporting the feature. No mounting screws or caddy are included in the package.
Erősségek
- 2TB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers responsive data access
- SATA 6.0Gb/s interface provides fast transfer rates
- 5-inch form factor fits compact desktop bays
- 512n sector format ensures broad system compatibility
Műszaki adatok
| Brand | Dell |
|---|---|
| Model | CK3MN |
| Interface | SATA 6.0Gb/s |
| Capacity | 2TB |
| RPM | 7200 RPM |
| Form Factor | 2.5" |
Kérdések a termékről
How much noise and heat does the 7200 RPM drive produce when running all day?
The 7200 RPM spindle speed generates typical mechanical hard drive noise and heat; a 2.5" form factor helps it fit in tighter bays with adequate airflow.
What existing hardware is required to install this CK3MN drive?
A free 2.5" drive bay or caddy, a SATA data cable, and a SATA power connector from the power supply are needed for installation.
Will this SATA 6.0Gb/s drive work with my older SATA controller?
Yes, the SATA 6.0Gb/s interface is backward compatible with earlier SATA standards, so it will operate on older controllers at the supported speed.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
