DELL PowerEdge M640 Blade Server 2x Xeon 8260 2.4GHz 24-Core 32GB DDR4 H330 57810S-K iDRAC9 Enterprise
- Blade
- Blade
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
DELL
Half-height blade server with dual 24-core Xeon Platinum 8260 processors at 2.4 GHz, 16 GB DDR4 ECC memory and two 960 GB SATA SSDs on a PERC S140 controller
SSD (Installed) 2 x 960GB SATA SSD
The Dell PowerEdge M640 is a half-height blade server built for dense compute environments. Two Intel Xeon Platinum 8260 processors run at 2.4 GHz with a 3.9 GHz turbo frequency, providing 24 cores per socket. Sixteen gigabytes of DDR4 memory and dual 960 GB SATA SSDs complete the base configuration.
This server fits workloads that demand high core counts in a compact blade form factor, such as virtualization farms and high-performance computing clusters. Buyers who need more than 16 GB of memory or who require GPU acceleration should look at other configurations.
The board supports up to 2 TB of DDR4 across 16 slots, making memory expansion the key specification for scaling this blade. The PERC S140 controller manages the installed SSDs and additional SATA or SAS drives with RAID 0, 1, 5 or 10.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.40 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 24-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 16GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc S140 Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | 2 x 960GB SATA SSD |
| Raid Level | RAID 0/1/5/10 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The PERC S140 is an integrated SATA controller that operates over the chipset PCIe lanes; it supports SATA 6 Gb/s per port, so each attached SSD is limited to that bus speed.
It fits a half-height slot in a Dell PowerEdge MX or M1000e chassis; the blade accepts two 2.5-inch drives and includes a Broadcom 57810S-K dual-port 10 Gb daughter card.
Slide the blade into the chassis until the latch engages, then use the iDRAC9 Enterprise interface to complete BIOS and RAID configuration before powering on the operating system installer.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?