Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver rectangular redundant server power supply unit with rear exhaust grille and connector bay

DELL

DELL RXCPH 570W Redundant Server Power Supply for PowerEdge R710 T610

SKU CH-BY6X-XA4EY

Redundant 570 Watt server power supply compatible with PowerEdge R710 and T610 systems

  • Single/RedundantRedundant
  • Weight10LBS
  • 570 W output powers demanding PowerEdge R710 and T610 workloads
  • Redundant design keeps the server running if one supply fails
  • 80 Plus efficiency rating reduces energy waste and heat
  • 1 kg weight simplifies rack installation and handling
  • Genuine Dell part ensures direct compatibility with R710 and T610

DELL 570W Redundant PSU for R710 T610

This new DELL RXCPH unit delivers 570 watts of redundant power for PowerEdge R710 and T610 servers. It carries 80 Plus certification and weighs 10 lbs. The hot-swap design lets administrators replace a failed module without shutting down the host.

Redundant hot-swap operation

Redundant architecture means a second unit shares the load so one failure does not drop the server. Hot-swap capability allows the faulty module to be removed and a replacement inserted while the system stays online. No additional cables or rails are mentioned in the data.

Tool-less bay installation

The supply slides into the standard redundant bay on the R710 or T610 and locks with the integrated latch. Alignment is the only common issue; forcing a misaligned unit can damage the back-plane connector. No software configuration is required once the module is seated.

Erősségek

  • 570 W output powers demanding PowerEdge R710 and T610 workloads
  • Redundant design keeps the server running if one supply fails
  • 80 Plus efficiency rating reduces energy waste and heat
  • 1 kg weight simplifies rack installation and handling
  • Genuine Dell part ensures direct compatibility with R710 and T610

Műszaki adatok

BrandDell
Series80 Plus
ModelRXCPH
Single/RedundantRedundant
Weight10LBS

Kérdések a termékről

How often will the redundant 570 W module need replacement in a PowerEdge R710?

The hot-swap redundant design lets you replace a failed unit without shutting down the server; the module itself has no user-serviceable parts inside.

What limit appears first when the RXCPH runs continuously at full load in a T610?

The 570 watt output ceiling is reached before any other constraint, so sustained draw above that level will trigger protection.

How much heat and fan noise does the 10 lb 80 Plus supply add to a rack running all day?

At 80 Plus efficiency the unit exhausts roughly one-fifth of input power as heat; the internal fan ramps with temperature but stays within Dell's acoustic spec for the R710 and T610.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.