Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
A silver 3.5 inch hard drive mounted in a black server caddy

DELL

DELL ST4000NM0033 4TB 7200RPM SATA 3.5" internal hard drive with Gen13 PowerEdge caddy

SKU CH-JPQM-AC1T2

A 4TB 7200RPM SATA 3.5" internal hard drive with 64MB cache, supplied with a Gen13 PowerEdge caddy for compatible servers

  • 4TB capacity stores large datasets and backups
  • 7200 RPM spindle speed delivers responsive read and write performance
  • 64 MB cache buffers bursts for smoother throughput
  • SATA 6Gb/s interface connects to standard server backplanes
  • Gen13 PowerEdge caddy fits R230 R330 R430 R530 R630 R730xd R730 R930 T330 T430 T630

4TB SATA drive for Gen13 PowerEdge servers

This Dell Constellation ES.3 drive delivers 4000GB of storage at 7200RPM with a 64MB buffer. It uses a 3.5" SATA 6Gb/s interface and includes the Gen13 PowerEdge caddy. The unit is designed for the R230, R330, R430, R530, R630, R730, R730xd, R930, T330, T430 and T630 servers. It is a new component supplied in its original tray.

Check your server model and drive bay

Confirm that your system is one of the listed Gen13 PowerEdge servers before ordering. The drive requires a standard 3.5" SATA hot-swap bay that accepts the included caddy. Verify that your backplane supports SATA 6Gb/s operation for full throughput. This unit is not compatible with 2.5" bays or non-Dell caddy designs.

Enterprise build with integrated caddy

The drive ships mounted in the Gen13 PowerEdge caddy for tool-less insertion into compatible chassis. The 7200RPM spindle and 64MB cache are rated for continuous operation in multi-drive arrays. The 3.5" SATA connector aligns directly with the server backplane, so no separate cables or adapters are needed during installation. Weighs 2.0 pound.

Erősségek

  • 4TB capacity stores large datasets and backups
  • 7200 RPM spindle speed delivers responsive read and write performance
  • 64 MB cache buffers bursts for smoother throughput
  • SATA 6Gb/s interface connects to standard server backplanes
  • Gen13 PowerEdge caddy fits R230 R330 R430 R530 R630 R730xd R730 R930 T330 T430 T630

Műszaki adatok

Ehhez a termékhez egyelőre nincs közzétett műszaki adat.

Kérdések a termékről

Does the Dell ST4000NM0033 come with the Gen13 PowerEdge caddy, or do I need to buy a tray separately?

The drive includes the Gen13 PowerEdge caddy so it fits directly into supported server bays without a separate tray purchase.

Which Dell PowerEdge models are confirmed compatible with this 4TB 7200RPM SATA drive?

Compatible Gen13 PowerEdge servers include R230, R330, R430, R530, R630, R730, R730xd, R930, T330, T430 and T630.

What sustained transfer rate can I expect from the 7200RPM platters and 64MB cache on a 6Gb/s SATA link?

The 6Gb/s SATA interface provides the link ceiling, while the 7200RPM speed and 64MB buffer determine real-world throughput for sequential workloads.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.