DIYPC DIY-mATX06-Wood Micro ATX PC case
- Micro ATX Tower
- Black
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
DIYPC
ATX mid-tower case with walnut front panel, tempered glass side, four pre-installed 120 mm PWM fans and room for 360 mm front or 280 mm top radiators
Options G18-Wood (Black)
The DIYPC DIY-G18-WD is an ATX mid-tower chassis finished in black steel with a tempered glass side panel and a walnut wood front accent. It supports ATX, E-ATX, Micro-ATX and Mini-ITX motherboards for a range of build sizes. Four 120mm PWM fans are pre-installed at the front and rear to provide immediate airflow.
Three front and one rear 120mm PWM fans ship already mounted, reducing assembly time and delivering balanced intake and exhaust out of the box. The interior includes two 3.5in and three 2.5in drive bays for mixed storage configurations. Seven expansion slots accommodate full-length add-in cards.
Graphics cards up to 340mm in length fit within the chassis, while CPU coolers are limited to 165mm in height. Power supplies up to 160mm deep can be mounted at the bottom. Radiator support extends to 360mm at the front and 280mm at the top for liquid cooling options.
| Brand | DIYPC |
|---|---|
| Model | DIY-G18-WD |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | Steel / Tempered Glass |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | 1 x Side Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 3 |
| Expansion Slots | 7 |
| Fan Options | Front: 3 x 120mm Black PWM Fan (Pre-Installed) Top: 3 x 120mm or 2 x 140mm fan (Optional) Rear: 1 x 120mm Black PWM Fan (Pre-Installed) |
| Pre-installed Fans | Front - 3 x 120mm / Rear - 1 x 120mm |
| Radiator Options | Front - up to 360mm, top - up to 280mm radiator |
| Max GPU Length | 340 mm |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | 160 mm |
| Dimensions | 15.92" x 8.6" x 19.44" |
| Szállítási súly | 6.42 kg |
| Csomagméret | 523 × 457 × 274 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Dust filters on the front and top panels catch debris before it reaches the fans. Remove and rinse the filters every few months; the PWM fans themselves are rated for long life and rarely need replacement under normal use.
The case supports a front radiator up to 360 mm and a top radiator up to 280 mm. If you rely only on the four pre-installed 120 mm fans, GPU temperatures will hit their ceiling before the CPU cooler height limit of 165 mm becomes a factor.
At maximum PWM duty the four 120 mm fans move significant airflow, so internal component temperatures stay lower, but audible fan noise rises noticeably. Adding optional top fans — three 120 mm or two 140 mm — lets you lower each fan's speed for quieter, cooler operation.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?