Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
22-piece 3D printer nozzle cleaning kit with 1.5mm poke, 20 needles, wire brush

EILKBLA 22Pcs Nozzle Cleaning Kit 1.5mm Poke 20x 0.4mm Needles Wire Brush 3D Printers Accessory

SKU CH-9MKX-PXDWA

Clears 1.75mm filament jams with a 1.5mm poke, 20 precision 0.4mm needles and a wire brush in a 22-piece kit

  • Typeno clogger 3d printer tool
  • Clear hot-end jams without disassembly using the 1.5 mm clog poke
  • Restore smooth extrusion with 20 precision 0.4 mm cleaning needles
  • Scrub nozzle tips and heater blocks clean with the included wire brush
  • Works with most FDM printers and 1.75 mm filament nozzles
  • Complete 22-piece kit covers unclogging, fine cleaning and routine maintenance

Complete 22-Piece Nozzle Cleaning Kit

This EILKBLA kit supplies 22 pieces for maintaining FDM 3D printers. It includes a 1.5mm clog poke, twenty 0.4mm cleaning needles, and a wire brush. The tools target filament jams and burnt residue inside 1.75mm filament nozzles. Regular use keeps extrusion smooth and print quality consistent.

Replaces Individual Picks And Brushes

Instead of buying separate needles, pokes, and brushes, this single kit covers hotend clearing, nozzle-tip scrubbing, and fine debris removal. The jump is worth it when a printer frequently clogs or when switching filament types leaves residue that single tools cannot clear. No disassembly is needed for the 1.5mm poke.

Suits Owners Of 0.4mm Nozzle FDM Printers

Makers running 1.75mm filament on printers with 0.4mm nozzles gain a complete maintenance set. Builders using larger-diameter nozzles, different filament sizes, or non-FDM technologies will not find compatible needles or pokes in this kit.

Erősségek

  • Clear hot-end jams without disassembly using the 1.5 mm clog poke
  • Restore smooth extrusion with 20 precision 0.4 mm cleaning needles
  • Scrub nozzle tips and heater blocks clean with the included wire brush
  • Works with most FDM printers and 1.75 mm filament nozzles
  • Complete 22-piece kit covers unclogging, fine cleaning and routine maintenance

Műszaki adatok

BrandEILKBLA
Modelno clogger 3d printer tool
Part Numberno clogger 3d printer tool
Typeno clogger 3d printer tool

Kérdések a termékről

What nozzle diameter do the 20 cleaning needles match?

The 20 needles are 0.4 mm in diameter, made for 0.4 mm nozzles on 1.75 mm filament printers.

How do I use the 1.5 mm clog poke without taking the hotend apart?

Heat the nozzle to printing temperature, insert the 1.5 mm poke straight down through the nozzle opening, and push the jam out — no disassembly required.

Which parts of the kit wear out and need replacing over time?

The 0.4 mm needles can bend or blunt with repeated use; the wire brush bristles will wear down; the 1.5 mm poke lasts longest but may eventually deform.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.