Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
White cubic rotary fitting with three G1/4 ports and knurled base

FormulaMod

FormulaMod G1/4" 3-Way Rotary Fitting White 24mm 360°

SKU CH-9NY8-VFP4Q

G1/4" 3-way rotary fitting with 360° head rotation and 180° flow redirection, 24 mm cubic brass body

  • TypeFittings
  • ColorWhite

Color White

  • 360° head rotation enables flexible tube routing
  • T-shaped design redirects flow up to 180°
  • High-throughput brass body maintains strong coolant flow
  • Built-in sealing ring prevents leaks at connections
  • 24 mm cubic head fits tight component spacing

FormulaMod G1/4" 3-Way Rotary Fitting White 24mm

This white FormulaMod fitting is a G1/4" three-way rotary adaptor designed for custom liquid-cooling loops. Its cubic head measures 24 mm on each side and rotates 360 degrees for flexible tube routing. The brass body includes a built-in sealing ring and a 9 mm knurled section for grip. It suits builders who need to split or redirect flow in multiple directions at a single junction.

Ideal for multi-direction routing

It works well when a loop requires three ports in a tight space and the ability to orient each port freely. The 360-degree head rotation and 180-degree water-path change allow complex layouts without extra fittings. It is not suited for builds that only need straight or angled two-port connections, nor for junctions requiring more than three ports at one point. Buyers wanting a simple coupler or elbow should choose a different fitting type.

G1/4" thread with 24 mm cubic rotary head

The single specification that determines fit is the G1/4" internal thread combined with a 24 mm cubic head that rotates 360 degrees. This defines compatibility with standard hard-tube or soft-tube fittings and the space needed inside the case. Verify that your blocks, radiators and reservoirs accept G1/4" ports and that 24 mm clearance exists around each connection point.

Erősségek

  • 360° head rotation enables flexible tube routing
  • T-shaped design redirects flow up to 180°
  • High-throughput brass body maintains strong coolant flow
  • Built-in sealing ring prevents leaks at connections
  • 24 mm cubic head fits tight component spacing

Műszaki adatok

TypeFittings
ColorWhite

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Does my loop need G1/4" threads to use this fitting?

Yes, every port on this fitting uses a G1/4" thread so your blocks, radiators and tubing adapters must all match that size.

Can I keep my existing rigid tubing runs when adding this 24 mm cubic fitting?

The 24 mm cube body and 9 mm knurled thread length fit standard G1/4" spacing, so current rigid tubes can stay if the new routing matches the three-port layout.

How do I verify the 360° rotary head moves freely after installation?

Gently turn the head by hand through a full 360° rotation; it should spin smoothly without binding, confirming the internal ring and high-throughput channel are seated correctly.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.