Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Blue heat spreader on two DDR3 desktop memory modules

G.SKILL

G.SKILL Ripjaws X F3-17000CL9D-8GBXM 8GB DDR3 2133 desktop RAM

SKU CH-BY4N-2DMXA MPN F3-17000CL9D-8GBXM

Dual-channel 8 GB DDR3 kit rated 2133 MHz CL9 with 9-11-10-28 timings and 1.65 V heat-spreaders for LGA1155 and Llano/AM3+ platforms

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 2133 (PC3 17000)
  • CAS LatencyCL9
  • Timing9-11-10-28
  • Voltage1.65V
  • ECCNo
  • Dual-channel 8 GB kit doubles bandwidth for faster multitasking
  • DDR3 2133 speed with CL9 timing cuts latency for snappy response
  • Low 1.65 V operation reduces heat and improves stability
  • Blue heat spreader on each DIMM dissipates heat efficiently
  • Intel XMP ready for one-click setup on LGA1155 platforms

Ripjaws X 8 GB DDR3 Kit

This Ripjaws X Series kit provides 8 GB of DDR3 memory in a matched pair of 4 GB modules rated at 2133 MT/s. It targets enthusiasts upgrading Intel LGA1155 or AMD Llano and AM3+ platforms who want a tested dual-channel configuration.

XMP Profile and Heat Spreader

The kit includes an Intel XMP profile for 2nd and 3rd Generation Core processors so the rated 9-11-10-28 timings load automatically. A blue heat spreader on each DIMM moves heat away from the ICs to help sustain stability at 1.65 V.

Unbuffered Non-ECC Build

These unbuffered, non-ECC DIMMs install in standard desktop slots without registration overhead. The dual-channel kit layout simplifies population rules on supported boards, and the 1.65 V operating voltage stays within the spec for the named platforms.

Erősségek

  • Dual-channel 8 GB kit doubles bandwidth for faster multitasking
  • DDR3 2133 speed with CL9 timing cuts latency for snappy response
  • Low 1.65 V operation reduces heat and improves stability
  • Blue heat spreader on each DIMM dissipates heat efficiently
  • Intel XMP ready for one-click setup on LGA1155 platforms

Műszaki adatok

BrandG.SKILL
SeriesRipjaws X Series
ModelF3-17000CL9D-8GBXM
Capacity8GB (2 x 4GB)
SpeedDDR3 2133 (PC3 17000)
CAS LatencyCL9
Timing9-11-10-28
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlue
Heat SpreaderYes
FeaturesCompatible with Intel LGA1155 and AMD Llano/AM3+ platforms
Intel XMP support for 2nd and 3rd Generation Intel Core Processors
Szállítási súly0.11 kg
Csomagméret216 × 140 × 19 mm

Kérdések a termékről

Will this dual-channel kit work on an Intel LGA1155 motherboard?

Yes, the kit is validated for Intel LGA1155 platforms and supports XMP profiles on 2nd and 3rd Generation Intel Core processors for automatic 2133 MHz operation.

Does the 1.65 V rating require a motherboard that can supply that voltage?

The modules run at 1.65 V; your motherboard must support this voltage for stable operation at the rated 2133 MHz speed.

Can I add this kit alongside an existing two 4 GB DDR3 kit for 8 GB total?

This kit provides 8 GB in two 4 GB modules; mixing with another kit is possible but matched modules from the same kit give the best stability at 2133 MHz CL9.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.