Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

HP

HP J9306A#B2E 1500W Proprietary Power Supply

SKU CH-P80N-C1JYS MPN J9306A#B2E

A 1500 W proprietary power supply delivering 300 W PoE+ at 110-127 V AC, 900 W PoE+ at 200-240 V AC and 600 W for switch power

  • TypeProprietary Power Supply
  • Maximum Power1500 W
  • FeaturesInput Voltage:110 V AC 220 V AC Weight (Approximate):7.50 lb
  • Dimensions5.1" Height x 7.5" Width x 6.1" Depth
  • Delivers 1500 W total output for demanding network infrastructure
  • Provides 900 W PoE+ power at 200-240 V AC input
  • Supplies 300 W PoE+ power at 110-127 V AC input
  • Reserves 600 W for switch operation independent of PoE load
  • Compact 5.1" x 7.5" x 6.1" form factor fits standard zl chassis

Proprietary 1500W Power Supply for HP zl Switches

This proprietary 1500W power supply is built for HP zl series network switches. It delivers both switch operating power and PoE+ capacity in a single module. Network administrators use it to power access points, phones and cameras through the switch ports.

PoE+ Headroom at Two Voltage Ranges

At 110 to 127 volts the unit provides 300W for PoE+ devices, while at 200 to 240 volts it provides 900W for PoE+ devices. Switch operating power is rated at 600W across both ranges. PoE+ capacity therefore depends on the local mains voltage available.

Replaces Existing zl Supply When PoE+ Demand Grows

It replaces a lower-wattage zl power supply when the connected PoE+ load exceeds the original module’s budget. The upgrade is worth it when the deployment adds more powered devices or moves to a 200 to 240 volt supply to unlock the higher PoE+ ceiling.

Erősségek

  • Delivers 1500 W total output for demanding network infrastructure
  • Provides 900 W PoE+ power at 200-240 V AC input
  • Supplies 300 W PoE+ power at 110-127 V AC input
  • Reserves 600 W for switch operation independent of PoE load
  • Compact 5.1" x 7.5" x 6.1" form factor fits standard zl chassis

Műszaki adatok

BrandHP
TypeProprietary Power Supply
Maximum Power1500 W
FeaturesInput Voltage:110 V AC
220 V AC
Weight (Approximate):7.50 lb
Input Voltage Type:AC
Dimensions5.1" Height x 7.5" Width x 6.1" Depth
Szállítási súly4.15 kg
Csomagméret353 × 274 × 267 mm

Kérdések a termékről

Will the J9306A#B2E power supply fit in my existing HP zl series switch chassis?

This unit is a proprietary power supply designed for HP zl series switches and measures 5.1" Height x 7.5" Width x 6.1" Depth, matching the zl power supply bay form factor.

How can I verify the J9306A#B2E is delivering the correct PoE+ power after installation?

The switch management interface reports real-time PoE consumption; at 110-127 V AC input you should see up to 300 W available for PoE+, and at 200-240 V AC up to 900 W for PoE+ alongside 600 W reserved for switch operation.

What comes with the J9306A#B2E and what must I source separately?

The power supply module itself is included; an AC power cord with the correct regional plug for 110 V AC or 220 V AC operation is not included and must be obtained separately.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.