Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 2U rack server chassis with eight front drive bays

HPE

HPE ProLiant DL380 Gen9 8SFF rack server 1× Xeon E5-2650 v3 384GB DDR4 no drive

SKU CH-QX48-CW63G

2U rack server with one 2.3 GHz 10-core Xeon, 384 GB DDR4, P440 SAS controller, dual 10 GbE and dual 1 GbE ports, iLO remote management, and eight 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • 10-core Xeon E5-2650 v3 at 2.3GHz for multi-threaded workloads
  • 384GB DDR4 ECC registered memory for large datasets
  • 8 SFF drive bays with P440 SAS controller for flexible storage
  • Dual 500W flex-slot power supplies for redundancy
  • iLO Advanced remote management with Intel 10GbE and 1GbE networking

Server identity

This HPE ProLiant DL380 Gen9 is a 2U rack server fitted with one Xeon E5-2650 v3 processor running at 2.3GHz and ten cores. It ships with 384GB of DDR4 ECC registered memory and an HPE Smart Array P440 SAS controller. No drives are installed, leaving the eight 2.5-inch bays ready for SATA or SAS media.

Who it suits

The configuration suits virtualisation hosts, database nodes or backup targets that need dense memory capacity and flexible drive selection. Buyers who require a second processor, more than eight drive bays or a controller that supports interfaces beyond SAS and SATA should evaluate a different platform.

Deciding specification

The single installed Xeon E5-2650 v3 provides ten cores at 2.3GHz with 25MB cache, and the chassis supports a second identical processor for future expansion. This core count and clock speed determine whether the server meets the compute demands of your workload.

Erősségek

  • 10-core Xeon E5-2650 v3 at 2.3GHz for multi-threaded workloads
  • 384GB DDR4 ECC registered memory for large datasets
  • 8 SFF drive bays with P440 SAS controller for flexible storage
  • Dual 500W flex-slot power supplies for redundancy
  • iLO Advanced remote management with Intel 10GbE and 1GbE networking

Műszaki adatok

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)3,84
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kérdések a termékről

How do I install the Xeon E5-2650 v3 processor and what step is often missed?

Align the processor with the socket triangle, lower the retention bracket evenly, and torque the heat-sink screws in a cross pattern to 10 in-lbs; skipping the cross-pattern torque causes uneven contact and thermal throttling.

What maintenance will the 384GB DDR4 memory configuration need over time?

Run the built-in memory test in iLO after every firmware update; replace any DIMM that logs correctable errors above the threshold before they become uncorrectable failures.

What limit appears first when the P440 SAS controller drives eight SATA drives at sustained write load?

The controller's 2GB write-back cache fills first, forcing writes to flush at the SATA drive speed and dropping throughput until the cache drains.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.