Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Metal mobile rack holding two 2.5 drives in a 3.5 bay with key lock and thumb screws

ICY DOCK

ICY DOCK ToughArmor MB492SKL-B 2 x 2.5 SATA SAS rack server

SKU CH-FVZG-MCYXG

Mobile rack fits two 2.5 SATA or SAS drives into one external 3.5 bay with key lock and thumb screw security

  • TypeRack
  • Holds two 2.5" drives in a single 3.5" bay
  • Key lock plus thumb screw secure drives against theft and vibration
  • Hot-swap trays let you replace drives without powering down
  • Runs SATA 6Gbps or SAS 12Gbps with 3Gbps backward compatibility
  • Full-metal build rated for enterprise workloads

Dual 2.5-inch Drive Mobile Rack

The ICY DOCK ToughArmor MB492SKL-B is a rugged full-metal mobile rack that installs into a single external 3.5-inch drive bay. It accepts two 2.5-inch SATA or SAS hard drives or solid-state drives ranging from 5 mm to 9.5 mm in height. The unit is built for enterprise environments where physical security and hot-swap capability are required. A dual-lock mechanism combines a key lock for drive security with a thumb screw for vibration resistance.

Single-Channel 12 Gbps SAS and 6 Gbps SATA Interface

The rack connects through a single channel that supports SAS 3.0 at 12 Gbps and SATA 3.0 at 6 Gbps. It remains backwards compatible with 3 Gbps SATA drives and hosts. A SAS host controller is required to operate SAS drives at full speed. This interface specification determines whether the rack matches the host bandwidth and drive protocol in your server or workstation.

Sustained Operation With Full-Metal Heat Dissipation

The all-metal construction acts as a heatsink for both drives during continuous read and write workloads. Removable trays allow drive replacement without powering down the system, maintaining uptime under load. The thumb-screw lock keeps each tray seated firmly, preventing connection loss from shock or vibration in rackmount deployments.

Erősségek

  • Holds two 2.5" drives in a single 3.5" bay
  • Key lock plus thumb screw secure drives against theft and vibration
  • Hot-swap trays let you replace drives without powering down
  • Runs SATA 6Gbps or SAS 12Gbps with 3Gbps backward compatibility
  • Full-metal build rated for enterprise workloads

Műszaki adatok

TypeRack

Kérdések a termékről

What does the 6 Gbps SATA rating mean once the unit is installed in a server?

It allows each 2.5 inch SATA drive to run at the full SATA 3.0 6 Gbps speed when the host controller supports that rate.

Which interface standard does the tray use and what throughput does it cap at?

The tray carries a single-channel SAS 3.0 connection that reaches 12 Gbps, while SATA drives are limited to 6 Gbps.

What physical space and mounting method does the MB492SKL-B need?

It occupies one external 3.5 inch drive bay and secures with a key lock plus thumb screws for vibration resistance.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.