Intel DC S3610 SSDSC2BX480G401 2.5" 480GB SATA enterprise SSD
- 2.5"
- 480GB
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Intel
2.5-inch SATA enterprise SSD with 400 GB MLC storage, 550 MBps read, 400 MBps write, AES 256-bit encryption and power-loss data protection
The Intel DC S3610 is a 2.5 inch 400GB solid-state drive built for servers and storage arrays that need consistent performance on a SATA III link. It uses MLC flash and a 20 nm lithography process to balance endurance and cost for business applications.
Replacing mechanical disks with this drive removes rotational latency and raises random read IOPS to 84,000 while sequential read reaches 550 MBps. The jump is worth it when databases, virtualisation hosts or logging systems hit I/O bottlenecks that a hard drive cannot clear.
The interface caps sequential throughput well below modern PCIe alternatives, so heavy write streams above 400 MBps will saturate the link. Buyers who need more bandwidth or lower latency than SATA allows should consider a different interface.
| Brand | Intel |
|---|---|
| Series | DC S3610 |
| Model | SSDSC2BX400G401 |
| Form Factor | 2.5" |
| Capacity | 400GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 400 MBps |
| 4KB Random Read | Up to 84,000 IOPS |
| 4KB Random Write | Up to 25,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 4.3W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g +/- 2g |
| Szállítási súly | 0.45 kg |
| Csomagméret | 178 × 152 × 51 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The drive measures .3 inches in height and uses a standard 2.5 inch form factor, so it fits any bay or caddy designed for that size.
It uses the SATA/600 standard; a common oversight is forgetting to connect both the data cable and the separate SATA power connector from the PSU.
The drive includes temperature monitoring, logging, and SMART attributes that track media wear and power-on hours, letting you schedule replacement before end of life.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?