Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Small green circuit board with a silver camera lens and a flat ribbon cable attached

KEHIPI

KEHIPI B0312 12MP IMX708 75° Autofocus Camera Module 15-22pin

SKU CH-ZF3W-GT4MC

A 12MP IMX708 camera module with 75° diagonal autofocus lens and 15-22pin FFC cable for Raspberry Pi 5, 4, 3 and Zero boards

  • 12MP IMX708 sensor captures 4608×2592 stills
  • 75° diagonal autofocus lens with PDAF and CDAF
  • HDR mode boosts dynamic range up to 3MP output
  • 15–22 pin FFC cable fits Pi 5, 4B, 3B, Zero W/2W
  • Native libcamera and Picamera2 support via CSI-2

12MP IMX708 Autofocus Camera Module

The KEHIPI B0312 is a 12MP camera module built around the Sony IMX708 sensor with a 75 degree diagonal field of view. It connects to Raspberry Pi boards using a 15 to 22 pin FFC cable and supports HDR still capture at 4608 by 2592 resolution. The module combines PDAF and CDAF autofocus for sharp images across varying distances. It is designed for makers and developers adding vision to Pi based projects.

Upgrade from fixed focus Pi Camera v2

This module replaces the fixed focus 8MP Camera Module v2 on Raspberry Pi 5, 4B, 3B and Zero W or 2 W boards. The jump is worth it when you need autofocus, higher 12MP resolution and HDR stills up to 3MP output. It also brings native libcamera and Picamera2 support on Bullseye OS. Note that configuration changes are required before use compared to the official Camera Module 3.

Suits Pi developers needing autofocus and HDR

Ideal for robotics, home automation and computer vision projects that demand automatic focus and high dynamic range on a CSI-2 interface. Not suited for users who require the exact official Raspberry Pi Camera Module 3 form factor or plug and play operation without configuration edits. Buyers needing global shutter, infrared cut filter switching or multi camera sync should look at other specialised modules.

Erősségek

  • 12MP IMX708 sensor captures 4608×2592 stills
  • 75° diagonal autofocus lens with PDAF and CDAF
  • HDR mode boosts dynamic range up to 3MP output
  • 15–22 pin FFC cable fits Pi 5, 4B, 3B, Zero W/2W
  • Native libcamera and Picamera2 support via CSI-2

Műszaki adatok

BrandArducam
ModelB0312
Part NumberB0312

Kérdések a termékről

What FFC cable pin count does the B0312 module require for the Raspberry Pi CSI connector?

The module uses a 15‑22pin flexible flat cable to connect to the Pi CSI‑2 interface.

Which configuration file must be edited before the IMX708 autofocus camera works with libcamera?

The user guide states that a modification to the Pi configuration is required before use; refer to the product description page for the exact steps.

Will the 66° horizontal field‑of‑view lens need periodic cleaning to maintain the 12MP IMX708 image quality?

Yes, keep the lens surface free of dust and fingerprints; gentle cleaning with a lens cloth preserves the 4608×2592 still‑image resolution.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.