Kingston Technology Corp. KC3000 SKC3000S/512G 512GB internal SSD
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Kingston Technology Corp.
1024GB M.2 2280 internal SSD with graphene-aluminium heat spreader delivering 7000 MBps read and 6000 MBps write over PCIe 4.0 x4 NVMe
The Kingston KC3000 is a consumer internal solid state drive with a 1024GB capacity. It uses a Phison E18 controller and 3D TLC memory in an M.2 2280 form factor. A graphene aluminum heat spreader is included for thermal management.
The drive connects through a PCIe 4.0 x4 NVMe interface which sets the maximum theoretical bandwidth available to the controller. Sequential reads reach up to 7000 MBps and writes up to 6000 MBps within that constraint. Random performance reaches 900,000 IOPS read and 1,000,000 IOPS write.
The terabytes written figure of 800TB defines the warranted write endurance for this 1024GB model. It is the primary metric for deciding whether the drive suits a given workload. MTBF is rated at 1,800,000 hours.
| Brand | Kingston |
|---|---|
| Series | KC3000 |
| Model | SKC3000S/1024G |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1024GB |
| Memory Components | 3D TLC |
| Interface | PCIe 4.0 x4 NVMe |
| Protocol | NVMe |
| Controller | Phison E18 |
| Max Sequential Read | Up to 7000 MBps |
| Max Sequential Write | Up to 6000 MBps |
| 4KB Random Read | Up to 900,000 IOPS |
| 4KB Random Write | Up to 1,000,000 IOPS |
| Terabytes Written (TBW) | 800TB |
| MTBF | 1,800,000 hours |
| HeatSink | with HeatSink |
| Features | PCIe 4.0 NVMe high-performance Upgrade with full capacities up to 4096GB Compact M.2 2280 form factor Low profile graphene aluminum heat spreader |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | 0.33W Avg / 2.8W (MAX) Read / 6.3W (MAX) Write |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Vibration Resistance | Operating: 2.17G Peak (7-800Hz) Non-operating: 20G Peak (20-1000Hz) |
| Height | 2.21mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| Szállítási súly | 0.02 kg |
| Csomagméret | 178 × 127 × 6 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The KC3000 series scales up to 4096GB. Choose 1024GB for a single OS-and-games drive; step up if you store large media libraries or want more TBW headroom.
It is the peak throughput the Phison E18 controller can sustain on large, queue-deep transfers. Everyday boot and game loads will be lower but still benefit from the headroom.
The x4 lane width sets a theoretical ceiling near 8 GBps. The KC3000 reaches 7000 MBps read and 6000 MBps write, so the drive saturates the link before the interface becomes the bottleneck.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?