Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 288-pin DDR5 RDIMM module with black chips, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KSM56R46BS8PMI-24MBI 24GB DDR5 RDIMM 5600 CL46 1Rx8 Registered ECC server RAM

SKU CH-VJFH-A9SKB MPN KSM56R46BS8PMI-24MBI

24 GB DDR5 RDIMM runs at 5600 MHz with CL46 latency, registered ECC and single-rank x8 layout for server stability

  • Capacity24GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Timing46-45-45
  • Voltage1.10V

Capacity 24GB

Rank 1Rx8

Option Micron, Full Lock

  • 24 GB capacity gives servers more room for complex workloads
  • 5600 MHz DDR5 speed moves data across two independent sub-channels per cycle
  • Registered signal processing reduces electrical load on the memory bus for stable operation
  • On-die ECC with x80 layout corrects bit errors inside the DRAM array
  • CL46 latency with 46-45-45 timing delivers quick data access at 1.10 V

24 GB DDR5 RDIMM for servers

This 24 GB DDR5 registered DIMM targets servers and workstations that require ECC protection and registered signalling. The module runs at 5600 MHz with CL46 latency and operates at 1.10 V. It suits administrators building or expanding memory arrays where data integrity is mandatory.

Sustained-load behaviour with on-die ECC

On-die ECC and x80 ECC across two independent I/O sub-channels correct errors continuously during heavy workloads. Hard and soft post-package repair adds resilience when the system runs at 5600 MHz for extended periods. The 1Rx8 organisation keeps electrical loading low on the memory bus.

Registered signal processing decides fit

Registered buffering reduces the electrical load on the server memory bus, allowing larger configurations than unbuffered modules permit. Buyers who need unbuffered UDIMMs or non-ECC memory for consumer platforms cannot use this part.

Erősségek

  • 24 GB capacity gives servers more room for complex workloads
  • 5600 MHz DDR5 speed moves data across two independent sub-channels per cycle
  • Registered signal processing reduces electrical load on the memory bus for stable operation
  • On-die ECC with x80 layout corrects bit errors inside the DRAM array
  • CL46 latency with 46-45-45 timing delivers quick data access at 1.10 V

Műszaki adatok

BrandKingston
ModelKSM56R46BS8PMI-24MBI
Capacity24GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Timing46-45-45
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Heat SpreaderNo
FeaturesPower Supply: VDD = 1.1V Typical
VDDQ = 1.1V Typical
VPP = 1.8V Typical
VDDSPD = 1.8V to 2.0V
On-Die ECC
x80 ECC (x40, 2 independent I/O sub channels)
32 internal banks
Hard/Soft Post Package Repair
Sideband access with I3C/I2C
PCB: Height 1.23" (31.25mm)
RoHS Compliant and Halogen-Free
Szállítási súly0.45 kg
Csomagméret178 × 127 × 51 mm

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

How much power does the 1.10V DDR5 5600 module draw under continuous load?

It runs at 1.10V typical VDD and VDDQ with a 1.8V VPP rail; registered buffering and on-die ECC add minimal overhead, so sustained draw stays low for a 24GB 1Rx8 DIMM.

Does my motherboard need a 288-pin DDR5 RDIMM slot with registered and ECC support to use this module?

Yes, it requires a 288-pin DDR5 RDIMM slot that supports registered signal processing and ECC; the 1Rx8 organisation and CL46 timing are negotiated at boot.

Will the 31.25mm height and 1Rx8 layout fit alongside existing DDR5 RDIMMs in a dense server chassis?

The 1.23in (31.25mm) PCB height matches standard DDR5 RDIMM form factor, and the single-rank x8 design presents one load per channel for broad compatibility.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.