Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Rectangular metal server PSU with 6-pin and 4-pin connectors, 22 by 8.1 by 6.2 centimetres

Lemincrash

Lemincrash B260EBM-00 260W server power supply

SKU CH-0NQY-9NRJ5 MPN B260EBM-00

260 W server power supply with 12 V output, 6-pin and 4-pin connectors, and independent 5 V, 12 V and 3.3 V feedback for Dell OptiPlex 7060, 5060 and 3060 desktops

  • Single/RedundantSingle
  • Maximum Power260W
  • Output12V
  • Input Voltage100 - 240 V
  • Input Frequency Range50/60 Hz
  • FeaturesIndependent 5V/12V/3.3V feedback
  • 260 W maximum output powers Dell OptiPlex 7060 5060 3060 desktops
  • 100-240 V input works worldwide without a voltage switch
  • 12 V output with independent 5 V and 3.3 V feedback keeps rails stable
  • 6-pin plus 4-pin connectors fit the original Dell motherboard layout
  • 80 Plus series rating reduces waste heat and lowers running cost

260W PSU for OptiPlex 7060 5060 3060

The Lemincrash B260EBM-00 is a single 260W server power supply built for Dell OptiPlex 7060 5060 3060 desktops. It delivers a 12V output through a 6Pin+4Pin interface and accepts 100-240V input at 50/60Hz. The unit includes independent 5V 12V 3.3V feedback for stable regulation.

Sustained 260W output with 80 Plus efficiency

Rated at a maximum of 260W the supply maintains continuous delivery rather than only peaking at that level. The 80 Plus series rating means it meets certified efficiency targets across typical load ranges reducing waste heat during long work sessions. Independent voltage feedback on each rail helps keep output steady when the system draws near the limit for extended periods.

Compact 22CM chassis with fixed cable connectors

The housing measures 22CM by 8.1CM by 6.2CM and weighs 1kg fitting the standard OptiPlex form factor without modification. A 6Pin+4Pin connector set is fixed to the unit so cable routing is determined by the chassis layout not by modular choice. Operating humidity tolerance spans 20% to 90% allowing deployment in varied office environments.

Erősségek

  • 260 W maximum output powers Dell OptiPlex 7060 5060 3060 desktops
  • 100-240 V input works worldwide without a voltage switch
  • 12 V output with independent 5 V and 3.3 V feedback keeps rails stable
  • 6-pin plus 4-pin connectors fit the original Dell motherboard layout
  • 80 Plus series rating reduces waste heat and lowers running cost

Műszaki adatok

BrandLemincrash
Series80 Plus
ModelB260EBM-00
Single/RedundantSingle
Maximum Power260W
Output12V
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
FeaturesIndependent 5V/12V/3.3V feedback
Dimensions22CM*8.1CM*6.2CM
Weight1kg
Humidity20%-90%
Package ContentsPSU*1

Kérdések a termékről

How much heat and fan noise should I expect from the 260W unit when it runs continuously?

The 260W supply carries an 80 Plus rating and uses independent 5V, 12V and 3.3V feedback to keep efficiency high, so waste heat and fan speed stay moderate during all-day operation.

What connectors must my motherboard already provide for this supply to plug in?

The unit terminates in a 6-pin plus 4-pin connector, so the host board needs matching 6-pin and 4-pin power headers.

Will the 260W unit fit and power a Dell OptiPlex 3060, 5060 or 7060 chassis I already own?

Yes — the 22 cm × 8.1 cm × 6.2 cm form factor and 6-pin + 4-pin interface are built for those OptiPlex models.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.