Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green PCB add-on board with dual RS485 transceivers and Pico header pins

LORDWORLD

LORDWORLD 2-Channel RS485 Module for Raspberry Pi Pico SP3485

SKU CH-94VX-ZFGX0

Adds two RS485 channels to a Raspberry Pi Pico via UART using the SP3485 transceiver

  • Dual RS485 channels expand industrial connectivity for Raspberry Pi Pico
  • SP3485 transceiver enables reliable UART-to-RS485 signal conversion
  • Standard Pico header ensures direct mounting without extra wiring
  • Development resources include C/C++ and MicroPython examples for faster integration
  • Supports full Raspberry Pi Pico series for broad compatibility

Dual-Channel RS485 HAT

This LORDWORLD module adds two RS485 ports to any Raspberry Pi Pico series board through the standard 40-pin header. It uses the SP3485 transceiver to convert the Pico UART signals into balanced differential pairs for long-distance serial communication. Development resources and manuals are included with C/C++ and MicroPython examples.

Makers needing industrial buses

The board suits developers who want to connect Modbus sensors, PLCs or multi-drop networks to a Pico without designing their own level-shifting circuitry. It is not for projects that require CAN bus, Ethernet or wireless interfaces, nor for builds that need more than two RS485 channels.

SP3485 transceiver choice

The on-board SP3485 chip determines the electrical characteristics of every RS485 link, including driver output levels and receiver sensitivity. Selecting this module means accepting the transceiver’s specified common-mode range and data-rate limits for the whole system.

Erősségek

  • Dual RS485 channels expand industrial connectivity for Raspberry Pi Pico
  • SP3485 transceiver enables reliable UART-to-RS485 signal conversion
  • Standard Pico header ensures direct mounting without extra wiring
  • Development resources include C/C++ and MicroPython examples for faster integration
  • Supports full Raspberry Pi Pico series for broad compatibility

Műszaki adatok

BrandLORDWORLD

Kérdések a termékről

How do I install the module on my Raspberry Pi Pico and which orientation mistake should I avoid?

Align the standard Pico header pins with the board’s socket and press straight down; reversing the board swaps the UART pins and stops communication.

What maintenance will the SP3485 transceiver need over time?

The SP3485 is a solid-state transceiver with no moving parts; keep terminals clean and check screw-terminal torque if vibration is present.

What limit appears first during sustained high-traffic RS485 use?

The UART baud-rate ceiling on the Pico becomes the bottleneck before the SP3485 reaches its thermal or signal-integrity limits.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.