LORDWORLD
LORDWORLD 27W USB-C Power Supply 5.1V/5A 1.2m Black
Delivers 27 W USB-C Power Delivery at 5.1 V/5 A, 9 V/3 A, 12 V/2.25 A and 15 V/1.8 A through a 1.2 m cable for Raspberry Pi 5
- Official 27 W USB-C supply built for Raspberry Pi 5
- 1 V 5 A output keeps the Pi stable under load
- 2 m cable gives flexible desk placement
- PD profiles at 9 V, 12 V, 15 V for wider compatibility
- Black finish resists visible smudges during daily use
Official 27W USB-C supply for Raspberry Pi 5
This 27 watt power supply delivers 5.1 volts at 5 amps through a fixed 1.2 metre USB-C cable. It is designed specifically for the Raspberry Pi 5 and also negotiates 9 volts at 3 amps, 12 volts at 2.25 amps and 15 volts at 1.8 amps via Power Delivery. Makers and developers who need the board’s full performance envelope should use this unit.
Check your board and cable routing before ordering
The connector is USB-C and the lead is permanently attached, so verify that your Raspberry Pi 5 port is accessible and that 1.2 metres reaches your socket without strain. The supply only provides the voltages listed above; do not use it for devices that require other Power Delivery profiles or a detachable cable. Ensure the mains plug matches your local outlet type.
Thermals noise and power draw in normal use
The black enclosure runs warm but stays within safe limits while delivering the rated 27 watts to a Raspberry Pi 5 under load. No fan is fitted, so operation is silent in typical indoor environments. Input current scales with the negotiated output voltage, drawing only what the attached board requests.
Erősségek
- Official 27 W USB-C supply built for Raspberry Pi 5
- 1 V 5 A output keeps the Pi stable under load
- 2 m cable gives flexible desk placement
- PD profiles at 9 V, 12 V, 15 V for wider compatibility
- Black finish resists visible smudges during daily use
Műszaki adatok
| Brand | LORDWORLD |
|---|
Kérdések a termékről
Does the LORDWORLD 27W USB-C power supply include the cable or must I buy it separately?
The unit ships with a fixed 1.2 m USB-C cable attached, so no separate cable purchase is needed.
Which voltage and current combination should I select for a Raspberry Pi 5?
The supply negotiates Power Delivery automatically; the Raspberry Pi 5 will draw 5.1 V at up to 5 A from the available 27 W budget.
What does the 27 W headline figure deliver once the supply is connected to a Raspberry Pi 5?
It provides up to 5.1 V at 5 A for the Pi 5, plus 9 V at 3 A, 12 V at 2.25 A and 15 V at 1.8 A for other PD devices.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.



