Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Small rectangular board with a 1.69 inch colour touch screen and exposed pin headers

LORDWORLD

LORDWORLD ESP32-C6 1.69inch Touch LCD Development Board 240×280 262K Color IPS

SKU CH-XQWN-3GPPB

A 1.69 inch touch LCD board with a 240×280 IPS display and 262K colours for AIoT development using Wi-Fi 6 and Bluetooth 5

  • Crisp 240×280 IPS touch screen with 262K colours
  • Dual 32-bit RISC-V cores up to 160 MHz for AI workloads
  • Wi-Fi 6 and Bluetooth 5 with Zigbee 3.0 and Thread
  • CST816T capacitive touch enables rich human-computer interaction
  • Compact 1.69-inch form factor suits portable IoT edge devices

Compact AIoT Development Board

This LORDWORLD board combines a 1.69 inch IPS touch display with an ESP32-C6 module for AIoT prototyping. The 240 by 280 pixel screen shows 262K colours and uses an ST7789V2 driver with a CST816T capacitive touch chip. A high-performance 32-bit RISC-V processor runs at up to 160 MHz alongside a low-power RISC-V core. It targets makers building smart devices that need on-device AI voice interaction.

Thermals Noise Power

The development board draws little power in normal operation thanks to its low-power RISC-V core and efficient wireless subsystems. No active cooling is required and the board runs silently. Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) connectivity are handled by the integrated radio. This makes it suitable for battery-powered or always-on edge applications.

On-Device AI Voice Access

The defining capability is support for AI voice interaction with online large-model platforms such as DeepSeek and Doubao. This lets the board process voice commands without a separate accelerator. Builders who need a display larger than 1.69 inches or who require a different wireless protocol should look elsewhere.

Erősségek

  • Crisp 240×280 IPS touch screen with 262K colours
  • Dual 32-bit RISC-V cores up to 160 MHz for AI workloads
  • Wi-Fi 6 and Bluetooth 5 with Zigbee 3.0 and Thread
  • CST816T capacitive touch enables rich human-computer interaction
  • Compact 1.69-inch form factor suits portable IoT edge devices

Műszaki adatok

BrandLORDWORLD

Kérdések a termékről

How do I wire the 1.69 inch touch display to the ESP32-C6 board and what step is often missed?

The ST7789V2 driver and CST816T touch chip are already embedded on the board, so no external wiring is needed; the step developers miss is enabling both the display and touch drivers in the SDK configuration before compiling.

Which on-board component will need attention or replacement after long-term use?

The 1.69 inch IPS panel and CST816T capacitive touch sensor are soldered to the PCB; they are not user-replaceable, so the board itself would be swapped if the display or touch function degrades.

What thermal or power limit appears first when the dual RISC-V cores run at 160 MHz continuously?

Sustained 160 MHz operation on the high-performance and low-power 32-bit RISC-V cores raises die temperature, triggering thermal throttling before any power-rail limit is reached.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.