LORDWORLD
LORDWORLD ToughArmor MB852M2PO-B 2×M.2 NVMe PCIe 4.0 9.5mm ODD Bay Adapter
Holds two M.2 NVMe SSDs in a 9.5mm ODD bay with dual PCIe 4.0 OCuLink connectors up to 64Gbps and a thermal pad
- Holds two NVMe SSDs in lengths 30, 42, 60, 80, 110 mm
- Dual PCIe 4.0 OCuLink links deliver up to 64 Gbps throughput
- Fits a 9.5 mm ultra-slim optical bay without modifications
- Built-in thermal pad moves heat from drives to the metal tray
- OCuLink pinout follows SFF-9402 for reliable signal integrity
Two-drive ODD-bay NVMe adapter
The LORDWORLD ToughArmor MB852M2PO-B mounts two M.2 PCIe NVMe SSDs into a single 9.5 mm ultra-slim optical drive bay. It accepts every common module length from 2230 through 22110 and connects each drive through a PCIe 4.0 OCuLink link. A metal tray and integrated thermal pad move heat away from the drives during sustained workloads.
Suits compact systems with a spare 9.5 mm bay
Builders adding high-speed storage to a laptop or small-form-factor chassis that still provides a 9.5 mm ODD opening will find the adapter a direct fit. The OCuLink interface follows the SFF-9402 pinout, so a matching host cable or backplane is required. Systems without a 9.5 mm bay or without OCuLink connectivity cannot use this device.
Dual OCuLink ports enable 64 Gbps aggregate
Each of the two OCuLink connectors delivers a PCIe 4.0 x4 link, giving up to 64 Gbps total transfer capacity when both SSDs are populated. This interface specification is the deciding factor: the host must supply two PCIe 4.0 OCuLink connections to realise the stated performance.
Erősségek
- Holds two NVMe SSDs in lengths 30, 42, 60, 80, 110 mm
- Dual PCIe 4.0 OCuLink links deliver up to 64 Gbps throughput
- Fits a 9.5 mm ultra-slim optical bay without modifications
- Built-in thermal pad moves heat from drives to the metal tray
- OCuLink pinout follows SFF-9402 for reliable signal integrity
Műszaki adatok
| Brand | LORDWORLD |
|---|
Kérdések a termékről
Does my laptop need a 9.5 mm ultra-slim ODD bay to fit this ToughArmor MB852M2PO-B?
Yes, the adapter is designed to install directly into a 9.5 mm ultra-slim optical drive bay.
Can I keep using my existing PCIe 3.0 OCuLink cables with this adapter's PCIe 4.0 connectors?
The adapter uses PCIe Gen 4 OCuLink connectors; they are backward compatible with PCIe 3.0 cables, though speeds will be limited to the older standard.
How do I verify both M.2 NVMe SSDs are running at the full 64 Gbps capability after installation?
Check the BIOS or OS device manager to confirm each drive negotiates a PCIe 4.0 x4 link, indicating the maximum 64 Gbps throughput per slot.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



