Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two black enclosed FDM printers side by side with touchscreens and cameras

MakerBot

MakerBot Sketch Classroom Two-Printer Setup 3D Printer

SKU CH-QX1R-TBQ19

Dual FDM printers with 150 mm³ build volume, CloudPrint software, Wi-Fi, Ethernet, USB, enclosed chambers, particulate filters, heated flexible build plates, replaceable extruders, on-board cameras.

  • Type3D Printer
  • ColorBlack
  • TechnologyFDM (Fused Deposition Modeling)
  • Build Size150mm x 150mm x 150mm (5.9 x 5.9 x 5.9 inches)
  • Filament Diameter1.75 mm (0.069 inches)
  • ConnectivityUSB, Ethernet, Wifi

Model Sketch Standard

Option Two-Printer Setup

  • Two printers let a whole class print simultaneously
  • 150 mm cubic build volume fits classroom projects
  • Enclosed chamber with particulate filter keeps air clean
  • CloudPrint queue manages jobs over USB Ethernet WiFi
  • Teacher and student certification seats build curriculum fast

Classroom two-printer bundle

This MakerBot Sketch package delivers two enclosed FDM printers built for classroom use. Each unit offers a 150mm x 150mm x 150mm build volume and ships with four 1 kg PLA spools, two 0.25 kg spools, four build plates, spatulas and snips. Teacher and student certification seats are included alongside MakerBot CloudPrint for queue management.

150 mm enclosed build volume

The 150 mm cubic build area sets the maximum part size you can produce in a single print. An enclosed chamber with a particulate filter, flexible heated build plate and replaceable extruder supports consistent output with 1.75 mm filament. Connectivity covers USB, Ethernet and WiFi for networked workflows.

Suits STEM programmes needing dual printers

Schools running concurrent student projects benefit from the paired hardware and included certification licences. Buyers who need larger parts, multi-material capability or resin-based detail should evaluate other technologies. Mac Catalina is not supported, so IT teams on that OS must plan accordingly.

Erősségek

  • Two printers let a whole class print simultaneously
  • 150 mm cubic build volume fits classroom projects
  • Enclosed chamber with particulate filter keeps air clean
  • CloudPrint queue manages jobs over USB Ethernet WiFi
  • Teacher and student certification seats build curriculum fast

Műszaki adatok

BrandMakerbot
ModelMakerBot Sketch Classroom Two-Printer Setup
Part NumberSKETCHKIT-KIT
Type3D Printer
ColorBlack
TechnologyFDM (Fused Deposition Modeling)
Build Size150mm x 150mm x 150mm
(5.9 x 5.9 x 5.9 inches)
Filament Diameter1.75 mm (0.069 inches)
ConnectivityUSB, Ethernet, Wifi
Operation System RequirementsWindows (7, 10)Mac OS X (10.12+)
Note: Does not support Mac Catalina
Software BundleMakerBot CloudPrint
Power Requirements100--240 V, 50-60 HZ2.7-1.3A
Package Contents(2) Sketch Printers
(4) Large Spools of PLA (1 Kg)
(2) Small Spool of PLA (0.25 Kg)
(4) Build Plates
(2) Spatulas
(2) Snips
(2) Seats in Teacher Certifications
(10) Seats in Student Certifications
MakerBot Cloud with Print Queuing
1 year warranty
DimensionsPrinter Dimension: 547mm (H) x 535mm (W) x 470mm (D) / 21.54in (H) x 21.07in (W) x 18.5in (D
WeightPrinter Weight: 11.8 kg (26 lb)
Szállítási súly31.75 kg
Csomagméret1118 × 535 × 470 mm

A modell további verziói

3 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

How large a model can the 150mm build volume actually produce?

Each printer can create parts up to 150mm x 150mm x 150mm, which is 5.9 inches per side, suitable for classroom prototypes and small functional pieces.

What does the USB, Ethernet and WiFi connectivity allow in daily use?

You can send jobs from MakerBot CloudPrint over the local network or WiFi, or load files directly via USB, giving flexible workflow options for multiple users.

What bench space and power does each 11.8kg unit need?

Each printer measures 547mm high x 535mm wide x 470mm deep and runs on 100-240V, 50-60Hz, drawing 2.7-1.3A, so a standard desk outlet is sufficient.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.