Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

Maxtor

Maxtor 4R120L0 120GB 5400 RPM 3.5" internal hard drive

SKU CH-8DQ0-FV2WE MPN 4R120L0

120 GB desktop drive with 5400 RPM spindle speed, 2 MB buffer, and 3.5-inch ATA/IDE-133 interface

  • Capacity120GB
  • RPM5400 RPM
  • 120 GB capacity stores documents and media
  • 5400 RPM spindle speed delivers reliable desktop performance
  • 5 inch low-profile form factor fits standard drive bays
  • ATA/IDE 133 interface connects to legacy motherboards
  • 2 MB buffer smooths read and write operations

Maxtor 120 GB IDE desktop drive

This Maxtor 4R120L0 is a 3.5 inch internal hard drive with 120 GB capacity and a 5400 RPM spindle speed. It uses an ATA/IDE133 interface and includes a 2 MB buffer. The unit is supplied new in retail or OEM packaging.

Suitable for legacy IDE systems only

The drive fits older desktops that still have a parallel ATA connector and a 3.5 inch bay. It is not appropriate for builds requiring a serial interface, nor for users who need higher spindle speeds or larger volumes for modern workloads.

ATA/IDE133 interface decides compatibility

The single specification that determines fit is the ATA/IDE133 interface; the motherboard must provide a matching 40-pin connector. Without that interface the drive cannot be installed, regardless of capacity or spindle speed.

Erősségek

  • 120 GB capacity stores documents and media
  • 5400 RPM spindle speed delivers reliable desktop performance
  • 5 inch low-profile form factor fits standard drive bays
  • ATA/IDE 133 interface connects to legacy motherboards
  • 2 MB buffer smooths read and write operations

Műszaki adatok

Capacity120GB
RPM5400 RPM
Szállítási súly0.91 kg
Csomagméret229 × 178 × 102 mm

Kérdések a termékről

Does my motherboard need an IDE connector to install this 3.5" drive?

Yes, the drive uses an ATA/IDE-133 interface, so an available IDE header on the motherboard or a compatible controller card is required.

Will this 5400 RPM drive slow down an older ATA-133 device sharing the same cable?

Both devices will run at the cable's maximum ATA-133 speed, but the bus operates at the slower device's timing, so the older drive sets the pace.

How can I verify the 120 GB capacity is recognised after installation?

Check the BIOS drive detection screen or open Disk Management in Windows; both should show approximately 120 GB for the Maxtor 4R120L0.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.