Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 3.5 inch bare hard drive with circuit board visible

Maxtor

Maxtor DiamondMax 10 6L200R0 200GB 7200 RPM 16MB Cache IDE Ultra ATA133 3.5" internal hard drive

SKU CH-7AS1-WKPW9 MPN 6L200R0

A 200 GB 3.5 inch IDE desktop drive spinning at 7200 RPM with 16 MB cache for quiet, reliable storage

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity200GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time9ms
  • 7200 RPM spindle delivers responsive desktop performance
  • 16 MB cache buffers bursts for smoother multitasking
  • IDE Ultra ATA133 interface fits legacy motherboards directly
  • Fluid dynamic bearing motor keeps acoustic levels low
  • Shock and Data Protection Systems guard stored files

Ideal for legacy IDE systems

This Maxtor DiamondMax 10 6L200R0 is a 200GB 3.5 inch internal hard drive built for desktop computers that still use the IDE Ultra ATA133 interface. It spins at 7200 RPM with a 16MB cache and delivers a 9ms average seek time. The fluid dynamic bearing motor keeps acoustic output low during operation.

Suits older desktop repairs or retro builds

Buyers maintaining or restoring systems with 40-pin IDE controllers will find the correct interface and form factor here. Systems that require Serial ATA connectivity cannot use this drive. Users needing capacities above 200GB or faster modern interfaces should look at other storage options.

The deciding spec is the IDE Ultra ATA133 interface

This single specification determines whether the drive fits your motherboard or controller. If your system provides a 40-pin IDE header rated for ATA133 or earlier ATA standards, the drive will connect and function. Without that interface the drive cannot be installed.

Erősségek

  • 7200 RPM spindle delivers responsive desktop performance
  • 16 MB cache buffers bursts for smoother multitasking
  • IDE Ultra ATA133 interface fits legacy motherboards directly
  • Fluid dynamic bearing motor keeps acoustic levels low
  • Shock and Data Protection Systems guard stored files

Műszaki adatok

BrandMaxtor
SeriesDiamondMax 10
Model6L200R0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity200GB
RPM7200 RPM
Cache16MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesFluid dynamic bearing motor for quiet operation
RoHS compliant
Improved reliability with:
Shock Protection System
Data Protection System
Form Factor3.5"
Szállítási súly0.69 kg
Csomagméret203 × 152 × 51 mm

Kérdések a termékről

How can I verify the drive is operating correctly after installation?

Listen for quiet operation from the fluid dynamic bearing motor and confirm the BIOS detects a 200GB drive with 16MB cache running at 7200 RPM on the IDE Ultra ATA133 interface.

What comes with the bare drive and what must I purchase separately?

The package contains only the 3.5" drive itself; you will need to supply an IDE data cable, a 4-pin Molex power connector, mounting screws and a 3.5" drive bay or adapter.

Which capacity and interface version should I choose for a legacy desktop?

This model provides 200GB over IDE Ultra ATA133 / ATA-7; select it if your motherboard has a 40-pin IDE port and you need a 7200 RPM drive with 16MB cache.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.