SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Maxtor
40 GB 3.5" desktop SATA drive spins at 7200 RPM with 2 MB cache and 10.1 ms seek time
The Maxtor DiamondMax 8S 6E040T0 is a 40GB 3.5 inch desktop hard drive built for the SATA 1.5Gb/s interface. Its 7200 RPM spindle and 2MB cache target entry-level systems that need basic internal storage without demanding high throughput.
Under continuous operation the drive delivers a 150 MB/s interface transfer rate while the 10.1ms average seek time and 4.17ms average latency govern real-world access speed. Native Command Queuing reorders pending commands to keep the platter moving efficiently during heavy multi-tasking workloads.
The 1.5Gb/s Serial ATA link caps maximum burst throughput well below modern SATA revisions, so the drive cannot saturate faster controllers. Mechanical latency and the small 2MB buffer further restrict random I/O performance, making the unit unsuitable for applications that require quick access to large data sets.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 8S |
| Model | 6E040T0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 40GB |
| RPM | 7200 RPM |
| Cache | 2MB |
| Average Seek Time | 10.1ms |
| Average Latency | 4.17ms |
| Features | Native Command Queuing Enables RAID for best mix of performance and reliability Fluid dynamic bearing motor for quiet operation Low height to improve airflow and cooling Low weight to reduce shipping costs Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Szállítási súly | 0.68 kg |
| Csomagméret | 203 × 152 × 51 mm |
The fluid dynamic bearing motor keeps acoustic levels low, while the low-profile 3.5" design improves airflow and cooling during all-day operation.
A motherboard or controller with a standard SATA data port and a SATA power connector from the power supply are needed to install this 40GB drive.
The drive operates at SATA 1.5Gb/s speeds and supports Native Command Queuing, so it will function with any compatible SATA host adapter, though performance matches the 1.5Gb/s link.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?