Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 3.5 inch bare hard drive with IDE connector

Maxtor

Maxtor MaXLine II 5A300J0 300GB 5400 RPM 2MB Cache IDE 3.5" internal hard drive

SKU CH-D0XP-Q168D MPN 5A300J0

300 GB 5400 RPM IDE Ultra ATA133 desktop drive with 2 MB cache and 10 ms seek time

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity300GB
  • RPM5400 RPM
  • Cache2MB
  • Average Seek Time10ms
  • 300 GB capacity stores large media libraries
  • 5400 RPM spindle balances speed and quiet operation
  • 2 MB cache smooths burst data transfers
  • IDE Ultra ATA 133 interface fits legacy desktop systems
  • 1 million hour MTTF rating supports nearline storage duties

Nearline 300 GB drive

The Maxtor MaXLine II 5A300J0 is a 300 GB 3.5 inch desktop hard drive built for low I/O nearline and secondary storage applications. It targets system builders who need affordable bulk capacity for media libraries or archival workloads rather than primary OS performance.

IDE Ultra ATA133 integration

The drive connects through an IDE Ultra ATA133 interface, so the host must provide a compatible 40 pin controller or motherboard header. Its 5400 RPM spindle and 2 MB cache keep power draw and acoustic output modest, freeing thermal headroom inside densely populated NAS chassis or legacy workstations.

Bare drive packaging

Supplied as a bare drive without cables, brackets or software utilities, the unit assumes the installer already has mounting hardware and an IDE data cable. The 1 million hour MTTF rating reflects design validation for continuous operation in tape or optical replacement roles, not a bundled monitoring suite.

Erősségek

  • 300 GB capacity stores large media libraries
  • 5400 RPM spindle balances speed and quiet operation
  • 2 MB cache smooths burst data transfers
  • IDE Ultra ATA 133 interface fits legacy desktop systems
  • 1 million hour MTTF rating supports nearline storage duties

Műszaki adatok

BrandMaxtor
SeriesMaXLine II
Model5A300J0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity300GB
RPM5400 RPM
Cache2MB
Average Seek Time10ms
Average Latency4.2ms
FeaturesDesigned to augment or replace tape and optical storage solutions
Proven in network attached storage solutions
Ideal for media and rich-content storage
Designed for 1 million hours MTTF in low-I/O nearline and other secondary storage applications
Form Factor3.5"
Szállítási súly0.68 kg
Csomagméret203 × 152 × 51 mm

Kérdések a termékről

How does the 5400 RPM spindle speed affect sustained throughput during long write sessions?

The 5400 RPM rotation limits sustained transfer rates compared to faster spindles, so extended sequential writes will plateau at the drive's native media speed rather than the 133 MB/s interface ceiling.

What noise and heat levels should I expect when the drive runs continuously in a NAS enclosure?

At 5400 RPM with 10 ms average seek and 4.2 ms latency, acoustic output and thermal load stay modest, making it suitable for always-on nearline storage without active cooling.

Which host interface must my system provide for this bare drive to be recognised?

The drive requires a native IDE Ultra ATA133 / ATA-7 connector on the motherboard or a compatible controller card; no adapter is included with the bare drive packaging.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.